Advertisement
Quick Links
TECHNICAL DATA (for standard unit)
1
1
FACE PLATE: 8" X 1
/
" X
2
1
1
STRIKE: 4" X 1
/
" X
/
"
2
8
ID REQUIREMENTS: 8" X 1
FINISH: US28 STANDARD (PLATED FINISHES OPTIONAL)
3
BOLT:
/
" DIA. SOLID STAINLESS STEEL
4
3
BOLT THROW:
/
", ROTATING
4
FAIL-SAFE: LOCKED WHEN ENERGIZED
AUTO RELOCK SWITCH: ADJUSTABLE BALL TYPE
SOLENOID: CONTINUOUS DUTY
ELECTRICAL DATA:
19 WATTS - .8 AMP MAX AT 24VDC
A RECTIFIER IS SUPPLIED FOR AC
OPERATION
(SPECIFY VOLTAGE REQUIRED)
STATUS SENSORS: BOLT AND DOOR POSITION (OPTIONAL)
M:\INS\Temp-1190A
REV A
0702
/
"
8
1
1
/
" X 1
/
"
2
2
Security Door Controls
3580 Willow Lane
Westlake Village, CA 91359
(805) 494-0622
Fax: (805) 494-8861
www.sdcsecurity.com
E-mail: service@sdscecurity.com
Page 1
NOTE: FOR WOOD INSTALLATION CONSULT FACTORY.
NOTE: TEMPLATE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT
NOTICE.
TEMPLATE
1190A
DATE
3/19/01
DRAWING
3293
Advertisement
Related Manuals for SDC 1190A Series
Summary of Contents for SDC 1190A Series
- Page 1 NOTE: FOR WOOD INSTALLATION CONSULT FACTORY. NOTE: TEMPLATE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. TECHNICAL DATA (for standard unit) FACE PLATE: 8” X 1 ” X ” STRIKE: 4” X 1 ” X ” ID REQUIREMENTS: 8” X 1 ”...
- Page 2 SECURITY DOOR CONTROLS 3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861 www.sdcsecurity.com • E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS FS23M, 1090, 1190 SERIES OVERHEAD INSTALLATION HORIZONTAL Examine the top rail of the door for the most suitable location for the strike. Mark the door for the end of the strike closet to the lock stile, and make a corresponding mark on the header to line up with the first mark.
- Page 3 SPECIFICATIONS FS23M Face plate: 8” x 1- ” x ” (203.2mm x 38.1mm x 3.175mm) I.D. Requirements: 8” x 1- ” x 1- ” (203.2mm x 38.1mm x 38.1mm) Solenoid: Continuous duty Standard voltage: 24VDC, 0.5 Amp 12VDC, 1 Amp Strike: M-Mortise 4”...