(19) Positioning the upper looper lubricating pin
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
1) Orientation of the lubricating pin
Oil inlet A of upper looper lubricating pin ❶ should face upward.
2) Setting the lubricating pin
The clearance provided between upper looper lubricating pin ❶ and upper looper holder pin ❷ should
be 0.6 to 0.7 mm.
Standard adjustment
A
❶
❷
❶
The oil wicks ❸ should not be
hubbly to the end face B of
the upper looper holder pin ❷ .
❶
B
0.6 to 0.7mm
❷
❸
0.6 to 0.7mm
B
– 32 –