JUKI MO-6800S Series Engineer's Manual page 10

PRECAUTIONS TO BE TAKEN SO AS TO USE
THE MO-6800S SERIES MORE SAFELY
1. So as to avoid electric shock hazards, do not open the cover of the electrical box of
the motor or touch any part inside the electrical box with the power to the machine
turned ON.
1. To prevent possible personal injury, never operate the machine with the belt cover and
the eye guard removed.
2. To protect against possible personal injury resulting from being caught in the motor,
use a motor that is provided with a motor pulley cover.
3. To avoid electric shock hazards, never operate the machine with the ground wire for
the power supply removed.
4. During operation, be careful not to allow your or any other person's head, hands or
fingers to come close to the handwheel, V belt and motor so as to prevent possible
personal injury that may occur when your hands/fingers are caught in the machine.
Also, do not place anything close to them.
5. So as to avoid possible injury to your hands and fingers, do not put any of them near
the cloth cutting knife and the needle when turning the power to the machine or while
the machine is in operation.
6. To prevent possible injury to your hands and fingers, do not put any of them inside
the eye guard while the machine is in operation.
7. To avoid electric shock hazards and accidents arising from damaged electrical com-
ponents, be sure to turn OFF the power switch before inserting/detaching the power
plug.
8. So as to protect against possible personal injury resulting from abrupt start of the ma-
chine, make sure to turn OFF the power to the machine when you leave your machine.
9. In the event of a power failure, be sure to turn OFF the power to the machine to protect
against possible personal injury resulting from abrupt start of the machine.
10. So as to protect against possible personal injury resulting from abrupt start of the
machine, remove the belt cover, motor pulley cover and the V belt after turning OFF
the power to the machine and confirming that the sewing machine will not run even by
depressing the start pedal.
11. Before inspecting, adjusting or cleaning the machine, threading the machine head or
replacing the needle, so as to protect against possible personal injury resulting from
abrupt start of the machine, be sure to turn OFF the power to the machine so as to
prevent an accident and confirm that the sewing machine will not operate even when
depressing the foot pedal of the sewing machine.
12. In order to protect against personal injury due to a fall of the sewing machine head,
never carry the sewing machine by holding the cloth plate cover. If you carry the sew-
ing machine by holding the cloth plate cover, the cover can break to allow the sewing
machine head to fall resulting in personal injury.
13. Be careful of handling this product so as not to pour water or oil, shock by dropping,
and the like since this product is a precision instrument.
14. Please operate this machine in 80% of the maximum speed in the first four weeks for
engagement. After four weeks, please do not operate under the maximum speed until
replacing the new lubrication oil.
15. Periodically maintain and clean the machine to ensure and extend the usage term of
the machine.
viii