GE H
EALTHCARE
D
5180263-100, R
IRECTION
8-4-6-5
System Software Load (cont'd)
11.)Press any key to continue; or to abort, remove the disk from the drive and press CTRL-C.
The System Software Load Instruction window displays.
If you select [1] in the next step, ALL existing software and data will be erased. If backup has not been
NOTICE
performed as described earlier in this manual, all data like Patient Database, System Configuration and
User Configurations (Customer Presets) will be lost.
5
EV
Figure 8-3 System Software load instruction (R1x.x)
Figure 8-4 System Software load instruction (R2.x.x)
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
8 - 13