Subscribe to Our Youtube Channel
Related Manuals for jbc DIS-D
Summary of Contents for jbc DIS-D
- Page 1 English Premium Desoldering station with Electric Pump Ref. DIS-D...
-
Page 2: Packing List
Packing List The following items should be included: DI Control Unit .... 1 unit Electric Desoldering Stand ....... 1 unit Ref. DI-1D (120V) Module...... 1 unit Ref. DR-SD DI-2D (230V) Ref. MS-A DI-9D (100V) Desoldering Iron.... 1 unit Tip Cleaning Sponge ...... 1 unit Ref. - Page 3 w w w.jbctools.com DR560 Accessories.. 1 unit Long Cleaning Cleaning tips set Ref. 0965970 tips set Ref. 0965760 Internal joint Case Ref. 0812360 (x2) C560013 ...... 1 unit Filter Box ...... 1 unit Metal tin diposit ..1 unit Ref. 0780840 Ref.
- Page 4 Features DI Control Unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Support Cable Equipotential connection connection Ref. 0011283 Module Cable Main switch Power Socket connector Ref. 0010207 Fuse Desoldering Iron Ref. DR560-A Stand Ref. DR-SD Electric Desoldering Module Ref. MS-A Suction Filter Ref.
-
Page 5: Usb Connector
Update the station software via USB connection: Cable USB AB JBC Manager www.jbctools.com/manager.html Manage and monitor as many stations as your Windows PC supports by using the JBC Manager. You can export data to another PCs. any JBC station Cable... -
Page 6: Operation
Operation The JBC Exclusive Heating System This revolutionary technology is able to recover the tip temperature extremely quickly. This allows the user to work at a lower temperature. As a result, the tip life increases x5 times. 1. Work 2. Sleep 3. -
Page 7: Process Control
w w w.jbctools.com Process Control Work Screen Displays a specific fixed temp. Fixed temp. 3 5 0 Shown when you have Levels ºC 2 7 0 3 5 0 4 0 0 selected temp. levels. Selected temp. 3 5 0 The work screen provides useful information of tool status in real time. - Page 8 Stand Cable collector Keeps working area free of cable. Quick tip changer Supporting system for tips is included Adjustable tool holder Adjustable Suits your work position. cable collector...
- Page 9 w w w.jbctools.com Desoldering process Use the tip model with a larger diameter than the pad to be desoldered, so as to achieve maximum aspiration and thermal efficiency. 1. Apply the desoldering iron 2. When the solder liquefies, 3. Press then, not before, the tip so that the component start gently to rotate the vacuum pump push-button...
-
Page 10: Changing The Heating Element
Changing the Heating Element 1. To perform this operation, shut down the station or disconnect the tool. The deposit lid needs to be loosened. 2. Undo the screw indicated in the picture and remove the Heating Element. 3. Place the new Heating Element. - Page 11 w w w.jbctools.com Tin Deposit Maintenance Check internal joint Then its spiral must be removed to clean the inner part of the deposit with the provided stick. - The condition of the filter and internal joint must be checked and replaced if dirty or damaged. Check filter The deposit needs to be inserted with spiral filter put into place, positioned between the 2 lines marked...
- Page 12 Changing the Pump Filters Important Do not open the Suction filter with sharp pointed objects in order to avoid damage. Suction filter Ref. 0821830 Cotton filters Ref. 0781046 O Ring Ref. 0007717 Filter cover Ref. 0004710 Spare filters Ref. 0005966...
- Page 13 w w w.jbctools.com Tip Cleaning stand Improve thermal transfer by cleaning the tip after each solder joint. Brass wool Sponge Ref. CL6210 Ref. S0354 Very effective cleaning The least harmful cleaning method. It leaves a small layer method. Keep the sponge damp of solder on the tip to prevent with destilled water when working oxidation between cleaning...
-
Page 14: Maintenance
Press the new fuse into the holder and If necessary use a tool to lever it off. replace it in the station. - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service. - Page 15 w w w.jbctools.com Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the equipment for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases. Be sure that it is properly grounded before use.
- Page 17 w w w.jbctools.com...
-
Page 18: Specifications
Specifications DI-1D 120V 50/60Hz. Input fuse: 2A. Output: 23.5V. DI-2D 230V 50/60Hz. Input fuse: 1A. Output: 23.5V. DI-9D 100V 50/60Hz. Input fuse: 2.5A. Output: 23.5V. - Total unit weight: 4,4 kg (9.6 lb) - Size: 90 x 105 x 180 mm - Temperature selection from 90°C (190°F) to 450°C (840°F) - Output Peak Power: 130W - Tip to ground resistance: <2 ohms... - Page 19 w w w.jbctools.com...
- Page 20 Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Need help?
Do you have a question about the DIS-D and is the answer not in the manual?
Questions and answers