Beltronics Vector 945 Owner's Manual page 16

Feature 1 – AutoMute On or Off
With "Am u t e o n ", your unit will
provide several X, K or Super
Wideband Ka audio alerts followed by
the Digital Voice announcement of the
signal detected. After the Digital Voice
announcement, a "clicking" tone keeps
you quietly informed for as long as the
signal is present. This clicking becomes
more rapid as the strength of the Radar
signal increases. "Am u t e o n " enables
you to conveniently monitor extended
encounters without having to manually
mute or adjust the volume setting.
With "A m u t e o f f ", your unit will
provide a continuous series of X, K,
Super Wideband Ka audio alerts and
Digital Voice announcements of the
signal detected. Digital Voice prompts
are provided once after the initial audio
alert. This standard setting is often
preferred when background noise in a
vehicle is loud. Factory setting is
"Am u t e o f f ".
Note: because of its urgency, Laser alerts
are not affected by this mode.
Programming
Feature 2 – Radar/Laser/SWS™ Digital
Voice Prompts
With "Vo i c e o n ", unit will provide
Digital Voice prompts followed by
"beeps" when X/K/Ka and Laser
signals are detected. With "Vo i c e o f f",
unit will sound unique audio tones
only. Factory setting is "Vo i c e o n ".
Feature 3 – Safety Warning System
(SWS™)
With "SWSo n ", unit will provide a
message when signals from SWS
transmitters are detected. Factory
setting is "SWSo n ".
Feature 4 – Audio/Visual Scroll Rate
When "SCRs l o w " is selected, unit will
provide a slow cycling of audio/visual
messages. When "SCR fa s t " is
selected, unit will provide a fast cycling
of audio/visual messages. Factory
setting is "SCRs l o w ".
13
®
™