Beltronics Vector 945 Owner's Manual page 5

Remove card along perforations
VECTOR 945
Operating Mode/Press and hold PWR button when unit is ON.
NORMAL *Standard, displays all information plus lengthy
power up test sequence.
MODS *Full power-up test sequence followed by Features
changed from factory pre-settings
Q-START *No power up test sequence when turned on. Unit
displays only travel mode selected:
Hi g h w a y , C i t y X
To access Programmable Features, with the unit OFF, press and
hold the PWR and CITY button simultaneously.
Press the AUDIO button to select feature;
Press CITY button to move forward in the list;
Press DARK to move backward in the list;
Press PWR to save your selections.
AutoMute *When ON, unit will sound an alert only two or
three times before engaging a clicking tone to
quietly monitor the signal. When OFF, unit will
sound continuous X/K/Ka alerts.
Radar/Laser/SWS TM
Digital Voice *When ON, unit will sound Digital Voice alerts;
when OFF, unit will sound unique audio tones
only.
SWS™ *When ON, unit will alert to SWS™ signals.
providing SWS™ transmitting devices are in use.
Audio/Visual *Choose FAST or SLOW Scroll Rate.
Inverted *When ON, display can be read if unit is
mounted upside down.
Display
Note: To re-set to factory default, press and hold CITY
V945
button until display shows:
Detachable Quick Reference Card
Quick Reference Card
Au t o Sc a n
or C i t y A L L .
RESET
,
2