Advertisement
Loading Paper
Open the Paper Support.
(1)
Adjust the position of the Paper Thickness Lever.
(2)
This lever switches the clearance between the Print Head and the loaded paper to match the media type.
Set it to the left when printing on plain paper.
Set it to the right when printing on envelopes or T-shirt transfers.
Note
If the corners or edges of paper are smudged, try to print with the Paper Thickness Lever
set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
3.
Load paper.
Align the paper stack against the right side of the Rear Tray (A) and load it WITH
(1)
THE PRINT SIDE FACING YOU and WITH THE BOTTOM UP.
Note
Do not load higher than the Load Limit Mark (B).
Стр. 28 из 342 стр.
Advertisement
