Advertisement
Alarm Lamp Flashes Orange
>
Advanced Guide
Troubleshooting
Alarm Lamp Flashes Orange
When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct
the error.
(A) Note the number of flashes
(B) Flashes repeatedly
Number of flashes/Cause
Two flashes:
Printer is out of paper. /Paper does not
feed.
Three flashes:
Paper jam.
Four flashes:
Ink has run out.
Five flashes:
The FINE Cartridge cannot be
recognized.
Seven Flashes:
FINE Cartridge is not installed in the
correct position.
Eight flashes:
Ink absorber is almost full.
Fourteen Flashes:
The FINE Cartridge cannot be
recognized.
Fifteen Flashes:
The FINE Cartridge cannot be
recognized.
Sixteen Flashes:
Ink level cannot be detected.
> Alarm Lamp Flashes Orange
Reload paper on the Rear Tray and press the
RESUME/CANCEL
The paper may be jammed. Remove the jammed paper,
reload paper properly in the printer, and then press the
RESUME/CANCEL
Paper Jams
Ink has run out.
Replace the ink cartridge and close the cover.
If printing is in progress and you want to continue printing,
press the
RESUME/CANCEL
with the ink cartridge installed. Then printing can continue
under the ink out condition.
The function for detecting the remaining ink level will be
disabled.
Replace the empty ink cartridge immediately after the
printing. The resulting print quality is not satisfactory, if
printing is continued under the ink out condition.
The FINE Cartridge may not be installed properly or it may
not be compatible with this printer.
Open the Front Cover and install the FINE Cartridge properly
or install the one compatible with this printer.
If the problem is not resolved, the FINE Cartridge may be
faulty. In this case, contact your Canon service
representative.
Make sure that each FINE Cartridge is installed in the correct
position.
Routine Maintenance
The ink absorber is becoming full.
The printer has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
Press the
RESUME/CANCEL
can continue printing. Before the ink absorber becomes
completely full, contact a Canon service representative. (You
will need to replace a particular part of the printer.)
The FINE Cartridge may not be compatible with this printer.
Install the appropriate FINE Cartridge.
Routine Maintenance
The FINE Cartridge may not be installed properly or it may
not be compatible with this printer.
Install the appropriate FINE Cartridge.
Routine Maintenance
Ink may have run out.
The function for detecting the remaining ink level will be
Action
button.
button.
button for at least 5 seconds
button to cancel the error so you
Стр. 278 из 342 стр.
Advertisement
