O Perating The Appliance; Lift Functions - Gaggenau AC270101 Instructions For Installation And Use Manual

Operating the appliance
en

O perating the appliance

1
T hese instructions apply to several appliance variants. It
O p e r a t i n g t h e a p p l i a n c e
is possible that individual features are described which
do not apply to your appliance.
If your appliance has Home Connect, more functions
are only available in the Home Connect app.
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Remote control
Use the remote control to set and adjust the various
different functions of your appliance.
Note: Align the remote control as precisely as possible
to the infrared receiver for the LED display on the
appliance.
Symbol Explanation
#
Switches the appliance on/off, switches the fan on/
off
B
Switches the lighting on/off, sets the brightness
Ç
Moves the appliance up
Æ
Moves the appliance down
r
Switches on automatic mode/climateControl sen-
sor
@
Increase the fan setting
A
Decreases the fan setting
μ
Switches on intermittent ventilation
·
Switches on the Home Connect app
œ
Resets the filter saturation indicator
32
LED display
LED Explanation
1 Fan setting 1
2 Fan setting 2
3 Fan setting 3
4 Intensive mode 1
5 Intensive mode 2
6 Automatic mode / fan run-on time / interval ventila-
tion
7 Home Connect
8 Infrared receiver

Lift functions

You can move the appliance down, up or into a defined
position using the Æ and Ç buttons.
Moving the appliance down
Press the Æ button.
The appliance moves down.
Notes
If you briefly press the Æ button, the appliance
–
moves down until it reaches the last stored position.
If you press and hold the Æ button for approx.
–
3 seconds, the appliance moves down as far as it
will go.
Moving the appliance up
Press the Ç button.
The appliance moves up.
Notes
If you briefly press the Ç button, the appliance
–
moves up until it reaches the last stored position.
If you press and hold the Ç button for approx.
–
3 seconds, the appliance moves up as far as it will
go.