Handling; Operating Principle - Atlantic 200L Electric Diagram

Hide thumbs Also See for 200L:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 43
Overview
Installation
Use
Maintenance
Warranty

3. Handling

The product incorporates several handles
making it easier to move to the location
where it will be installed.
To transport the water heater to the
installation location use the lower and
upper handles.
Acceptable position
Prohibited positions
Follow the transport and handling recommendations on the water heater's packaging.

4. Operating principle

Intake air
Outlet air
The thermodynamic water heater uses exterior air for
heating the domestic supply water.
The refrigerant contained in the heat pump carries out a
thermodynamic cycle allowing it to transfer the energy
contained in the outside air to the water of the tank.
Hot water outlet
The fan sends a stream of air into the evaporator. As it
passes through the evaporator, the refrigerant evaporates.
The compressor compresses the vapours of the fluid which
raises its temperature. This heat is transmitted by the
condenser wrapped around the tank and warms the water
tank.
Cold water inlet
The fluid then flows into the thermostatic expansion valve,
it cools and returns to its liquid form. It is then ready to
receive heat again in the evaporator.
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

200l c270l270l c200 coil270coil

Table of Contents