Quadratec Q Series Assembly And Installation Manual page 10

Clutch Handle Removal (Optional)
NOTE: Our Patent Pending removable
Clutch Handle doubles as a "key"
that can be temporarily
deter winch line theft, vandalism and
pranksters.
Rotate Clutch Handle to the "FREE
SPOOL" position to reveal the set screw
that holds the handle in place. Using a
2.5 MM Allen wrench, back out the set
screw until the Clutch Handle lifts off but
do not remove the handle at this time.
Once the Clutch Handle is removed, it
can be stored in the vehicles glove box
removed to or console and used only when winching.
Clutch handle removal is optional.
Rotate the clutch selector to the
"ENGAGED" position. You may remove
the Clutch Handle now and keep it in
a safe place. We suggest keeping the
Clutch Handle somewhere in the vehicle,
Note: If the handle is not present when
winching is needed, a standard 3/8" drive
socket wrench extension can be used to
rotate the clutch selector mechanism.
ON THE WINCH UNLESS THE SET SCREW IS
FULLY ENGAGED TO SECURE THE HANDLE IN
PLACE.
US PATENT PENDING
10
DO NOT KEEP THE
CLUTCH HANDLE