Personal Protective Equipment (Ppe; Warnings - Abicor Binzel TIG ABITIG MT Operating Instructions Manual

2 Safety

2.3 Personal protective equipment (PPE)

2.4 Warnings

EN - 6
• 2004/108/EC: Directive on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
• DIN EN 60974-2: Equipment for arc welding part 2: Liquid cooling
systems
• DIN EN 60974-4: Equipment for arc welding part 4: Periodic inspection
and checking
• EN 60974-7, Pkt. 7.4.2: Equipment for arc welding part 7: Torches
• DIN EN 60974-9: Equipment for arc welding part 9: Set up and operation
• DIN EN 60974-10: Equipment for arc welding part 10: Requirements
concerning Electromagnetic Compatibility (EMC)
• Occupational health and safety regulations of the country in question. For
example, Germany: Protection Law and the Company Safety Ordinance
• Regulations on occupational safety and accident prevention
To avoid dangers for the user, wearing personal protective equipment (PPE) is
recommended in these instructions.
• It consists of protective clothing, safety goggles, class P3 respiratory mask,
safety gloves and safety shoes.
In these operating instructions, potentially dangerous work steps are preceded
by the following warnings. Arranged in descending order of danger, they
mean:
DANGER
Describes an imminent threatening danger. If this danger is not avoided, it
will result in fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it can result in
serious injury.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
®
ABITIG MT