Downloading The Project File - rako WK Instruction Manual

Type ​ - This will change the appearance of the icon used at the top of the room screen on the
App. It will also affect the keypad that appears. For example a room set to "switch" will show
two buttons: "on" and "off" whereas a "blind" type room will show three buttons: "open",
"stop" and "close".
Mode - ​ T he mode of the room is only set when "lighting" is selected as the type. It will set the
variety of "keypad" that will appear in the App. Typically it is best to make this match the
physically keypad in the room.
NB
1) If a number of scenes that is not 4, 7 or 16 is desired then "named scenes" should be
selected. Give custom names to the scenes in the room editor and any number of scenes can
be made to appear on the App.
2) While the order of the rooms can be changed from this screen the order of the channels is
always fixed. To get channels in a specific order they must be addressed or mapped in the
desired order.

7 Downloading the project file

If information has been uploaded to the HUB then it is possible to import the Room, Channel
and Scene data into a blank project file.
The tab used for downloading information from the HUB is called "​ R oom Import​ " select it to
open the page below.
WK-HUB
8
Manual Version 1.0.0