Adding The Hub As A Device To Rasoft Pro; Uploading The Project File - rako WK Instruction Manual

Step 4 - ​ O nce it has linked the HUB will ask to be given a "Nickname". This is how it will be
referred to in the my.rakocontrols.com interface. It is not the same as the "HUB name" as
defined within the HUB setup wizard.
Once completed the ​

5 Adding the HUB as a device to Rasoft Pro

Once the HUB has been successfully connected it will need to be added into the software as
a device.
- Select "File"- "New Device" to open the new device wizard. Choose "HUB" as the
device to be added.
- Select "Next" on the "Assign to Room" step. No room or channel needs to be
associated to the HUB.
- Select the HUB from the list, it will appear if you are successfully connected in the
communications window. Click "Refresh" if it does not appear.
- The HUB should now appear in the device list with green text and a blue icon. The
device is now assigned.
- Press the "Update Now" button in the centre of the screen to complete setup. If this
does not appear click on the HUB in the device list.

6 Uploading the project file

Once ​ t he entire system​ has been completed the project file should be uploaded to the
HUB. The HUB stores the Room, Channel and Scene information for the system. This
information is required for the App. to operate correctly.
The "Smartphone/Web Data" tab is used to upload the Project File to the HUB. Once
selected it will open the page as below. Press "​ S ave & Upload Room Data To HUB​ " to
upload.
WK-HUB
m y.rakocontols.com ​
" Devices" page should appear as below:
7
Manual Version 1.0.0