Setting Events Using Rasoft Pro - rako WK Instruction Manual

10
For example it is possible to automatically turn on the Garden lights on at Dusk and turn off
the Garden lights at Dawn.

8.1 Setting Events using Rasoft Pro

HUB Events can be viewed and edited using Rasoft Pro. To open the events page in the
software select the HUB in the device editor and select the "Events" tab from the top of the
window.
Mappings List:
All Events are listed down the left hand side of the screen. Select it such that it is highlighted
to edit the "Event Trigger/Active Days" and "Output Action" sections for this Event.
Event Trigger/Active Days:
The "Event Trigger" and "Active Days" are the timing conditions that define when the event
will occur.
NB
The dawn and dusk settings can be changed via the location settings in the webpage interface. An
offset from this value can be set from this screen if desired.
WK-HUB Manual Version 1.0.0