Table of Contents
Advertisement
16
Holiday mode is most easily controlled from the App. However it is also possible to change
the holiday mode state from a keypad map, HUB map and by pressing buttons directly on
the HUB.
NB
For how to control Holiday mode via the App. see "
A pp user Guide
" .
12 UDP Feedback
It is possible to monitor commands received and transmitted by the HUB. This can be done
using the UDP Feedback feature.
12.1 Live feedback
In the very bottom right of the software (below the communications window) is the Live
feedback section. Each command received or transmitted by the HUB will appear here and it
is useful for checking commands have been programmed as desired.
12.2 UDP feedback log
When more detailed or long term feedback is required then a log of commands
received/transmitted by the HUB can be opened. In the toolbar select "Window" - "Output" -
"Output" (as shown below).
WK-HUB
Manual Version 1.0.0
Advertisement
Table of Contents
