5: Bundling The Cables - Sony KDL-40EX520 Service Manual

3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Anchor bolts (M6) (not supplied)
Wall-
mount
holes
~
• Your TV is shipped with screws attached to the
rear of the TV depending on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two
screws prior to anchoring the TV on a wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.

5: Bundling the cables

~
• Before bundling the cables, remove the cable
holder from the AC cover (see step 1 and 2).
Reuse the cable holder (see step 3) to bundle
the other cables (see step 4).
Rope or
• Do not bundle the AC power cord together
chain
with other cables.
(not
supplied)
KDL-46/40/32EX52x (except
KDL-40/32EX521 (Mexico models))
Wall-anchor
(not
supplied)
1 1
3 3
KDL-40/32EX521 (Mexico models)
1 1
3 3
* When installing on the wall, attach the cable
holder under the terminals.
2 2
4 4
2 2
4 4
*
13