Equalizer Terminator TSK710 User Manual page 7

Apply a drop of pit filler resin. Place a mylar square cure sheet onto the pit filler
resin. Be sure to gently place the cure sheet in a download laying motion and let
gravity do the rest.
Place the UV lamp over the break, power on and let cure for 50 seconds. *UV
lamp will flash when curing and turn off when complete.
Remove the UV lamp and mylar square. Using a new razor blade, scrape the new
resin in a back and forth motion at a 90 degree angle until the resin is even and
level with the glass. *Spray water or glass cleaner over the repair to make remov-
ing resin easier.
Apply a drop of pit polish over the repair and using a clean, dry paper towel buff
vigorously until the pit resin is shiny.