Advertisement
Before You Brew
1
Plug & Place
Remove packing tape from coffee
maker. Plug into a grounded outlet.
Place a large mug (296 ml/10 oz) on
the drip tray.
NOTE: If changing water tank position to the back,
please complete before first brew (refer to instructions
included).
3
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The coffee
maker will power on automatically.
Brew Your First Cup
5
Place Mug & Pod
Place a mug on the drip tray. If using a
travel mug, remove the drip tray and
place the mug on the drip tray base.
Lift the handle and place a K-Cup® pod
in the K-Cup® pod holder. Lower the
handle completely to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
For bolder coffee press the STRONG button,
followed by the BREW button.
For iced beverages fill a large plastic tumbler with
ice. Insert any K-Cup® pod, then press the OVER
ICE button, followed by the BREW button.
NOTE: Choose a tumbler large enough to accommodate both the ice and
dispensed liquid to prevent overflow.
Multi-position Water Reservoir
Position along the left or back of the coffee maker
to optimize counter space.
ATTENTION!
This coffee maker is only compatible with the newly designed
Keurig® My K-Cup® Universal Reusable Coffee Filter.
Do not attempt to use any other reusable filter or
previous versions of Keurig® My K-Cup® Universal
Reusable Coffee Filter; may cause damage
to coffee maker.
2
Power Button
Over Ice
1
2
3
Remove the water reservoir lid, then
4oz
12oz
6oz
10 oz
8oz
lift the reservoir straight up to remove
it. If you have a Keurig
install it now. Refer to your Water
Filter Starter Kit for instructions.
Rinse reservoir with fresh water and
fill to the MAX FILL line.
Replace water reservoir, making sure
the lock tabs engage with the coffee
maker. Replace lid.
NOTE: Do not use distilled water.
4
The 4 cup sizes will blink. Press the 8oz
button, then press the blinking BREW
button to start a cleansing brew. Pour
the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
6
The 4 brew size buttons will blink.
Select your brew size, then press the
blinking BREW button. For a stronger
coffee, press the STRONG button
before brewing. The BREW button
will remain illuminated while brewing.
Brewing is complete when the buttons
are no longer illuminated. Lift the
handle and dispose of the K-Cup
CAUTION: While brewing, there is extremely hot water
in the K-Cup® pod holder. To avoid injury, do not lift the
handle during the brewing process.
Coffee Maker Features
Smart Start heats then brews in one simple process. No need
to wait for the coffee maker to heat before selecting brew size.
Simply power on your coffee maker by lifting the handle, add a
K-Cup
The coffee maker will heat, then automatically begin brewing.
Auto Off automatically turns your coffee maker off 5 minutes
after the last brew for energy savings.
High Altitude To ensure your coffee maker works properly at
higher altitudes (1,500 metres/5,000 feet) please enable the
High Altitude Brewing Mode on your coffee maker.
1. Power the coffee maker off while it is plugged in.
2. Press and hold the BREW and 8 oz buttons for 3 seconds. The
12 oz button will illuminate to confirm that the High Altitude
Brewing Mode has been enabled.
Strong Brew for a bolder, more intense cup.
Over Ice brew your favourite beverages over ice.
Rinse & Fill
Water Filter,
®
Cleansing Brew
Brew & Enjoy!
pod, select your brew size, then press the BREW button.
®
Brew Button
6
oz
12
oz
1
8
oz
10
oz
Brew Button
6
oz
12
oz
8
oz
10
oz
pod.
®
Advertisement
