Coffee Maker Features - Keurig K-Mini Plus Use & Care Manual

Before You Brew
1
Plug & Power
Remove packing tape from coffee
maker. Pull plug and extend cord
from cord storage located at the
back of the coffee maker. Plug into
a grounded outlet.
Press the power button. The power
button will illuminate.
3
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The brew
indicator light will flash to indicate
that the coffee maker is ready.
Brew Your First Cup
5
Fill & Place Mug
Add desired amount of water into a
mug (177 ml/6 oz minimum,
355 ml/12 oz maximum). Lift the
water reservoir lid and pour the
water into the reservoir. Do not fill
past the MAX or below the MIN fill
lines. Lower the lid and place your
mug on the drip tray.
7
Brew & Enjoy!
Press the brew button - for bolder
coffee, press the STRONG button
before pressing the brew button. The
brew indicator light will illuminate
solid, then begin to pulse while the
coffee maker is heating. After about
2 minutes, the brew indicator light
will illuminate solid again and the
beverage will begin to dispense.
Brewing is complete when the brew
indicator light is no longer illuminated. When complete,
lift the handle and recycle the used K-Cup® pod in 3 easy steps.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do
not lift the handle during the brewing process.
Add 1 cup (237 ml/8 oz) of
water into a mug. Lift the water
reservoir lid and pour the water
into the reservoir. Do not fill past
the MAX or below the MIN fill
lines. Lower the lid and place your
mug on the drip tray.
NOTE: Do not use distilled water.
Press the brew button. The brew
STRONG
indicator light will illuminate solid, then
STRONG begin to pulse while the coffee maker is
heating. After about 2 minutes, the brew
indicator light will illuminate solid again
and the water will begin to dispense.
Pour the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
STRONG Button
Brew Button
*Currently recyclable in select locations. Visit Keurig.ca/recyclable for more information.
2
Fill & Place
4
Cleansing Brew
6
Lift & Place Pod
Lift the handle. Place a K-Cup® pod in
the K-Cup® pod holder. Lower the handle
completely to close the lid. The brew
indicator light will flash to indicate that
the coffee maker is ready. Do not remove
the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding the coffee
maker handle up, push down slowly on the
K-Cup® pod in the pod holder until the bottom of
the K-Cup® pod is punctured by the exit needle.

Coffee Maker Features

Strong Brew increases your coffee strength and intensity. For bolder coffee
press the STRONG button.
Pod Storage holds 9 K-Cup® pods and fits in your coffee maker to save
counter space.
Removable Water Reservoir for easy cleaning and filling.
Auto Off: Automatically turns your coffee maker off 90 seconds after the
last brew for energy savings.
Cord Storage: Makes transporting your coffee maker convenient and keeps
countertops tidy.
Travel Mug Friendly: Remove the drip tray to accomodate a travel mug.
Brew Button
STRONG
STRONG