Table of Contents
Advertisement
DOK-MOTOR*-MBT********-IT02-EN-P
Rexroth IndraDyn T Synchronous Torque Motors
5
Transport and Storage
5.1
Notes about Transport (Shipping) Instructions
5.2
Instructions on Machine Transport
Transporting stators in the housing
The motor components (rotor and stator) must be transported in their original
package taking classes 2K2, 2B1, 2C2, 2S2, 2M1 specified acc. to
DIN EN 60721-3-2 into account.
Please observe the following classification limitations:
●
Transport temperature range -20 ... +80 ℃
●
Relative air humidity max. 75 % (at +30 °C)
●
No occurrence of salt mist
Before transport, discharge the liquid coolant from liquid-cooled
stators with housings (capsule "H") to avoid frost damage.
NOTICE
Installed components (e.g., KTY84, encoder) may contain
electrostatic sensitive devices (ESD).
Observe ESD safety measures.
WARNING
Only use hoisting gear suited for the weight of the motors.
Use the lifting eye bolts provided on the housing to lift the
stator with its housing. Check that the lifting eye bolts are
fixed tightly before each use.
Never walk under hanging loads.
Use suitable protective equipment and protective clothing
during transport, and wear safety shoes.
Do not lift or move the motor by the loom of cables.
Remove
commissioning and keep them
Please note DIN 580 standard on the transport of motors by
means of lifting eye bolts. Non-observance of the information in
this standard may cause overload of the lifting eye bolts and
result in injury to persons or damage to products.
Stators with housing feature one or two lifting eye bolts on the upper face of
the housing, depending on the stator length or size, for transport. These
lifting eye bolts must also be used to lift and position the stators.
Bosch Rexroth AG
Transport and Storage
Never
touch
the
connection
electrostatic sensitive devices!
Risk of injury and material damage due to
improper handling during transport!
any
existing
transport
27/73
points
of
locks
prior
to
Advertisement
Table of Contents
