Mounting The Rotor - Bosch Rexroth IndraDyn T Instructions Manual

36/73 Bosch Rexroth AG
Installation
6.2.3

Mounting the Rotor

Fixing thread on the rotor
Frame size
MST360
MST450 / 530
M Tightening torque in Newton meters
GA
µ Coefficient of friction
G
Fig.6-4: Mounting screws with tightening torque
The machine manufacturer has to consider the special characters
of his construction and must work out special mounting instruc‐
tions for the rotor and stator motor components. The machine
manufacturer's mounting instructions are the only binding guide‐
lines.
WARNING
⇒ Eliminate movable metal objects or secure against movement.
⇒ Strong magnetic and electromagnetic fields pose a health hazard for
persons with heart pacemakers, metallic implants and hearing aids in the di‐
rect environment of motor components!
⇒ Refer to the information at
Electromagnetic Fields" on page
① Fixing thread around rotor (both sides)
Fig.6-5: Fixing thread on rotor
Rotor
MRT130 M5 / 10 mm deep
MRT160 M6 / 12 mm deep
MRT161 M5 / 12 mm deep
MRT201 M5 / 14 mm deep
MRT210 M6 / 14 mm deep
DOK-MOTOR*-MBT********-IT02-EN-P
Rexroth IndraDyn T Synchronous Torque Motors
Screws (property class 8.8)
M16 x ...
M20 x ...
The rotor is magnetic! Risk of injury and dan‐
ger of crushing body parts by magnetic
forces!
chapter 2.6.3 "Protection against Magnetic and
17.
Fixing thread on rotor
Dimensions
M [Nm] at µ 0.12
GA G
206
415
Number
8 (one side only)
12
12
12
12