Step 2: Attach The Hose To The Convective Warmer - Smiths Medical level 1 Operator's Manual

Step 2: Attach the Hose to the Convective Warmer

1. Connect the thermistor cable (a) from the hose to the thermistor receptacle (b) mounted
inside the air outlet (c). To connect, align the three prongs in the thermistor with the three
holes in the receptacle, then gently push the thermistor inward to secure it in the receptacle.
2. Attach the hose (d) to the air outlet. Push the hose firmly into the outlet.
d
S E C T I O N 5
a
b
Level 1®
CONVECTIVE WARMER
• I n i t i a l S e t u p a n d D a i l y U s e
c
(shown with optional pole clamp installed)
| Operator's Manual
19