Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 1/25/21...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Page 6
Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
Page 8
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 1/25/21...
Order new labels from your or with a similar type straight edge. nearest Land Pride dealer. To find your nearest dealer, visit our dealer locator at www.landpride.com. 3. Some new equipment installed during repair requires safety labels to be affixed to the replaced component as specified by Land Pride.
Page 11
Table of Contents Important Safety Information 74851 848-747C Warning: High Pressure Fluids 74851 838-293C Warning: Read Manual 74851 844-342C Warning: Falling Hazard 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
Page 12
Important Safety Information 74851 858-692C Notice: Not Intended for Skid Steer or Track Loader 74851 838-614C 2" x 9" Red Reflector (2 places) 74850 838-615C 2" x 9" Amber Reflector (1 place) STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
Your Land The STB0554 and STB0560 front-mounted Snow Trip Pride dealer has trained personnel, repair parts, and Blades are designed and built by Land Pride to meet the equipment needed to service the attachment. needs of landscapers, farmers, ranchers, school systems, and municipalities.
Go through the Pre-Assembly Checklist before assembling the Snow Trip Blade. To speed up your Land Pride offers two cutting edge options, steel cutting edge and poly cutting edge, for the Snow Trip Blade. The assembly task and make the job safer, have all needed steel cutting edge for tougher applications and the poly parts and equipment readily at hand.
Page 15
4. Install remaining carriage bolts (#2) and hex flange Refer to Figure 1-3: locknuts (#3). Land Pride offers 28" tall orange markers that can be 5. Tighten nuts to proper torque. bolted to each side of the moldboard. They are ideal for locating the outer ends of the blade when approaching 6.
Page 16
Angling Options Assembly Manual Angle-Bent Pin Assembly Refer to Figure 1-4: Land Pride offers two angling options for the Snow Trip Blade. The Snow Trip Blade can be angled either Drive 1/4" x 1 3/4" roll pin (#1) through bent pin (#2).
Page 17
9. Thread hoses (#6) through U-bolt (#11). to the base end. Tighten adapters. 5. Attach hoses (#6) to adapters (#10) and (#4) and tighten. 6. Thread two 5/16"-18 hex nuts (#12) to U-bolt (#11). 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
Use hydraulic system to retract angle cylinder until 2. Clean quick connect couplers of dirt and then connect couplers to the tractor remote outlets. Make air is purged. sure quick connect couplers have fully engaged. h. Tighten fitting. STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
1/4" = 250 lbs (110 kg) of break out force 1" = 300 lbs (140 kg) of break out force 1 1/2" Max = 400 lbs (180 kg) of break out force Spring Adjustment Figure 2-3 STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
The cutting edge can suddenly spring back due to a high return spring load. • Do not disassemble the cutting edge or trip springs while trip springs are loaded. The sudden release of this force can cause great bodily harm. 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
When traveling on public roads at night or during the day, use accessory lights and devices for adequate warning to operators of other vehicles. Comply with all federal, state, and local laws. STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
Snow Trip Blade. proper authorities. Snow Trip Blade Level to Ground d. Identify tight areas that will be hard to turn around Figure 3-1 in and make a plan for clearing such areas. 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
Trip Blade to your tractor loader, you are now almost ready to begin work. The Snow Trip Blade is designed and built by Land Pride for 17 to 30 hp (12.7 to 22.4 kW) WARNING tractors with a front loader using a universal quick-attach To prevent serious injury or death: hitch.
Page 25
Steel and Poly Cutting Edge Options Refer to Figure 4-2: Refer to Figure 4-1: Land Pride offers a 12" wide deflector flap mounted on the Land Pride offers two types of cutting edge options, steel moldboard to prevent snow from going over the cutting edge (#1) and poly cutting edge (#2), for the Snow moldboard.
Page 26
Refer to Figure 4-4: Land Pride offers two angling options for the Snow Trip Land Pride offers two hose options for hooking up to your Blade. Each option will angle up to 24 degrees to the left tractor. The 24...
Assembly” on page 24 if your cutting edge is made 10. Return to the tractor. Raise unit up and remove of poly wear material. support blocks. 74858 Steel Cutting Edge Removal and Assembly Figure 5-1 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
Page 28
(#1) up and attach to moldboard (#5) with carriage bolt (#2), retaining plate (#1), and nut (#3). Draw nut (#3) up snug but do not tighten. 74857 Poly Cutting Edge Removal and Assembly Figure 5-2 STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
3. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
Provides operator with improved awareness and visibility of outermost edges of the blade Blade marker to prevent unwanted contact with ground obstacles. Locking system Allows for light blading. Optional top-mounted Helps prevent snow from over-topping the moldboard in deeper snow conditions. rubber deflector STB0554 & STB0560 Snow Trip Blade 301-701M 1/25/21...
Hydraulic hoses are hooked-up wrong. hoses and reconnect to the power direction expected equipment. Power equipment arms are not set in float Low areas do not clean-up well Set power equipment arms to float mode. mode. 1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.