Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French or Spanish Language, please see your Land Pride dealer. Printed 11/8/18...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SGC1560, SGC1572, & SGC1584 Claw Grapples 380-074M 11/8/18...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. SGC1560, SGC1572, & SGC1584 Claw Grapples 380-074M 11/8/18...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Lower attachment to the ground and Replace parts on this attachment trained personnel using the follow all shutdown procedures with genuine Land Pride parts only. correct tools and equipment. before leaving the operator’s seat to Do not alter this attachment in a way ...
Page 7
Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery Land Pride recommends the use of a CAB or roll-over-protective- Never carry riders on the power structures (ROPS) and seat belt machine or attachment.
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Introduction Introduction The parts on your grapple have been specially designed Land Pride welcomes you to the growing family of new by Land Pride and should only be replaced with genuine product owners. This grapple has been designed with Land Pride parts. Contact a Land Pride dealer if customer care and built by skilled workers using quality materials.
Go through the “Assembly Checklist” on this page before assembling the Claw Grapple. To speed up your assembly task and make the job safer, have all needed parts and equipment readily at hand. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 11/8/18...
Page 11
NOTE: Customer to select which fitting best fits However, Optional Hydraulic Hose Kit No. 380-063A is equipment set-up, 90 elbows (#5) or straight available through Land Pride upon request. It includes: adapters (#6). 2 ea. 1/2" R2 x 76" lg. Hydraulic Hoses with Fabric 5. Attach 90 elbows (#5) or straight adapters (#6) Sleeve, 3/4"...
5. Rotate top of skid steer/tractor tilt arms back until grapple makes full contact with face of hitch plate. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 11/8/18...
Slowly retract and extend hydraulic cylinders to purge any trapped air from the system. Raise grapple fully up and repeat steps 4-6. c. Tighten fittings (#11) to hydraulic cylinders (#12) once all trapped air is removed. 11/8/18 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
• Keep load positioned forward enough to prevent accidental spillage on operator and power machine. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 11/8/18...
Page 15
Consult your power machine Operator’s Manual to determine proper weight requirements and maximum weight limitations. 11/8/18 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Before traveling with a loose load, lower load to ground, release load, and re-clamp load to make it more secure. 12. Position load at a safe, low traveling height before transferring to unloading site. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 11/8/18...
Page 17
8. Leave enough clearance when turning and/or lowering the grapple so that it does not make contact with obstacles such as vehicles, buildings, trees, or fences. 11/8/18 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Page 18
It isn’t going to 2. Park skid steer/tractor on a flat, level, solid surface take you long to learn how to use your new Land Pride and lower grapple onto the surface.
3. Repaint parts where paint is worn or scratched to actuated even when power to hydraulics is off. prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding WARNING TU, QT, or GL to the end of the aerosol part number.
1 1/4" Pivot pins Large diameter pins for extra strength. Dual hydraulic cylinders Allows upper jaw to grip the material better. Grade 80 teeth material More than double the strength of mild steel. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 11/8/18...
Prying objects out of the ground. Never use grapple to pry objects. Wedging objects between teeth with upper Do not wedge objects between teeth with jaw. upper jaw. 11/8/18 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.