BenQ PD Series User Manual page 16

7. Install the headphone hook (optional step).
You can install the headphone hook to place your
headphone. It is useful when your headphone is not in
use.
Orient and align the headphone hook with the hole on
the monitor stand, and attach the hook to the hole
( ).
Turn the hook clockwise until you cannot go further
( ). The headphone hook is ready to use.
The maximum load capacity of the headphone hook is 500g.
8. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and select an input source
by the OSD control keys.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
23 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
16 How to assemble your monitor hardware
2
1
(HDMI / DP / mini DP)