BenQ PD Series User Manual page 14

2. Connect the PC video cable.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port
on the monitor. Connect the other end of the cable to
the HDMI port of a digital output device.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video
socket. Connect the other end of the cable to the
computer video socket.
After the monitor is powered on, if the image is not
displayed, disconnect the cable. Go to
on the OSD menu of the monitor and change
DisplayPort
the setting from
1.2
To go to the OSD menu, see
30.
To Connect the mini DP Cable
Connect the plug of the mini DP cable to the monitor
video socket. Connect the other end of the cable to the
computer video socket.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
3. Connect the headphones.
You may connect headphones to the headphone jack
found on the back side of the monitor.
14 How to assemble your monitor hardware
System
to , and then connect the cable again.
1.1
Basic menu operation on page
and
Or
Or
Or