Table of Contents
Advertisement
VAN WALT
Monitoring your needs
It is common practice in an e-SENSE measuring system for the e+ sensor
to be permanently installed. This requires it to be connected by means of
an e+ sensor e SENSE cable to an e-SENSE SMS modem (field modem).
An e-SENSE measuring system is designed to carry out remote wireless
transmission of the measurement data from the e+sensors by means of an
SMS modem to a central (Internet) database. This does away with
having to read data in the field. For further information about e SENSE
measuring systems, the e-SENSE data site or e-SENSE direct and points of
note in connection with the installation, you are referred to the instruction
Van Walt Ltd | Prestwick Lane | Grayswood | Haslemere | Surrey | GU27 2DU | Tel. 01428 661 660 | Fax. 01428 656 808 | www.vanwalt.com
Operating Instructions
Rain Gauge
manual for the e-SENSE SMS modem (field modem), the e-SENSE data site
and e-SENSE direct. For more information about the types and lengths of
connection cable as well as the IrDa-interface please refer to Chapter 1.1,
"Package contents".
7
Advertisement
Table of Contents
