Table of Contents
Advertisement
VAN WALT
Monitoring your needs
16.Mount the sensor connector to the e+ logger and screw it hand tight.
Sensor connector
17.
Shove the e+ logger in the square tube of the measuring unit, the sensor cable is curved
along the e+ logger.
14.Push the e+ logger in the square tube just that far that the tap holes of the mounting nut
correspond with the first pair of holes in the square tube. Screw in both vandalism proof bolts.
Sensor cable
Van Walt Ltd | Prestwick Lane | Grayswood | Haslemere | Surrey | GU27 2DU | Tel. 01428 661 660 | Fax. 01428 656 808 | www.vanwalt.com
Operating Instructions
Rain Gauge
Sensor cable
Ring nut
e+ logger
Second pair of holes
Vandalism proof bolt
12
Advertisement
Table of Contents
