Van Walt Rain Gauge Operating Instructions Manual page 11

VAN WALT
Monitoring your needs
13.Shove the e+ logger in the square tube of the measuring station, the sensor cable is curved
along the e+ logger.
14.Push the e+ logger in the square tube just that far that the tap holes of the mounting nut
correspond with the first pair of holes in the square tube. Screw in both vandalism proof bolts.
Sensor cable
Continue with step 19
15.Screw the opto-connector of the communication cable on the e+ logger, the postion pen of
the opto- connector fits in the free space of the e+ logger.
Van Walt Ltd | Prestwick Lane | Grayswood | Haslemere | Surrey | GU27 2DU | Tel. 01428 661 660 | Fax. 01428 656 808 | www.vanwalt.com
Operating Instructions
Rain Gauge
Sensor cable
Position pen
Second pair of holes
Vandalism proof bolt
11