Subscribe to Our Youtube Channel
Related Manuals for jcb JCB-20BLCD
Summary of Contents for jcb JCB-20BLCD
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-20BLCD Original Instructions IM-20BLCD-EN...
- Page 2 Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-20BLCD Instruction & User Manual...
- Page 3 For more information go to www. P65Warnings.ca.gov/wood. The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20BLCD Instruction & User Manual...
-
Page 4: Table Of Contents
CHARGER TECHNICAL DATA NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits/Drills ON/OFF Trigger Direction Selector Torque Setting Mode Selector Gearbox Speed Selector Switch Maintenance Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20BLCD Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or with your finger on the switch or energising wet conditions. Water entering a power power tools that have the switch on invites tool will increase the risk of electric shock. accidents. JCB-20BLCD Instruction & User Manual... -
Page 6: Power Tool Use And Care
Such preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20BLCD Instruction & User Manual... - Page 7 JCB-20BLCD Instruction & User Manual...
-
Page 8: Tool Specific Safety Warnings
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. JCB-20BLCD Instruction & User Manual... -
Page 9: Charger Safety
To reduce risk of injury, only charge if they have been given supervision JCB rechargable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together. - Page 10 JCB-20BLCD Instruction & User Manual...
-
Page 11: Component List
GEARBOX SPEED SELECTOR SWITCH CHARGER* ON/OFF TRIGGER BATTERY PACK* - PLEASE REFER TO FORWARD/REVERSE DIRECTION TABLE ON PAGE 12 FOR BATTERY INFORMATION SELECTOR SWITCH BATTERY TEST BUTTON AND AUTOMATIC LED LIGHT CHARGE INDICATOR* *If applicable JCB-20BLCD Instruction & User Manual... -
Page 12: Tool Technical Data
72 dB(A) A-Weighted Sound Pressure (LpA) Concrete Drilling 75 dB(A) A-Weighted Sound No Load 83 dB(A) Power (LwA) Concrete Drilling 86 dB(A) & K 5 dB(A) Wear ear protection when sound pressure is over 80 dB(A) JCB-20BLCD Instruction & User Manual... -
Page 13: Vibration Information
Avoid using tools in temperatures of 10 ° or less. THIS TOOL MAY CAUSE HAND-ARM Plan your work schedule to spread any high VIBRATION SYNDROME IF USAGE IS vibration tool use across a number of days. NOT ADEQUATELY MANAGED. JCB-20BLCD Instruction & User Manual... -
Page 14: Operating Instructions
Make sure the power tool ON/OFF Trigger battery from the charger. is not operated when inserting or replacing Battery Charge Level the battery. Use with JCB batteries only: JCB-20-15LI, JCB-20-20LI, JCB-20-30LI, Green Battery Charge Status JCB-20-40LI and JCB-20-50LI. -
Page 15: Replacing Bits/Drills
Tighten the chuck until it grips the accessory. Grip the chuck firmly and turn it clockwise. ON/OFF Trigger Gradually press the ON/OFF Trigger to start the power tool The power tool has variable speed: JCB-20BLCD Instruction & User Manual... -
Page 16: Direction Selector
Incorrect selection may cause damage to the power tool, workpiece or drill bit. NOTE Check that the drill bit is correctly inserted and the chuck is properly tightened before starting the power tool. JCB-20BLCD Instruction & User Manual... -
Page 17: Gearbox Speed Selector Switch
Do not over-tighten screws. This risks Move the gearbox speed selector switch (4) damaging the screw head or thread. forwards towards the chuck to position 2 for high speed (0 to 1800 rpm). JCB-20BLCD Instruction & User Manual... -
Page 18: Maintenance
WARNING! Never open the power tool. The power tool has no internal parts that the user can service or repair. Never try to repair the power tool yourself. Take to an authorised service centre. JCB-20BLCD Instruction & User Manual... -
Page 19: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. - Page 20 JCB-20BLCD Instruction & User Manual...
-
Page 21: General Certificate Of Conformity
IEC 55014-2:2015 IEC 55014-1:2017 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &... - Page 22 JCB-20BLCD Instruction & User Manual...
Need help?
Do you have a question about the JCB-20BLCD and is the answer not in the manual?
Questions and answers