Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for jcb JCB-20JS
Summary of Contents for jcb JCB-20JS
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-20JS Original Instructions IM-20JS-EN...
- Page 2 Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-20JS Instruction & User Manual...
- Page 3 For more information go to www. P65Warnings.ca.gov/wood. The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20JS Instruction & User Manual...
-
Page 4: Table Of Contents
Inserting Saw Blade Power Switch Startup Mitre Cutting Use of hex key on base plate adjustment Adjusting the Pendulum Stroke Dust Removal and Dust Collection Parallel Stop Maintenance Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20JS Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-20JS Instruction & User Manual... -
Page 6: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20JS Instruction & User Manual... -
Page 7: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-20JS Instruction & User Manual... -
Page 8: Tool Specific Safety Warnings
“live” and could give the operator an electric shock. Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. JCB-20JS Instruction & User Manual... - Page 9 Do not use dull or damaged blades. Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding and kickback. JCB-20JS Instruction & User Manual...
-
Page 10: Charger Safety
To reduce risk of injury, only charge if they have been given supervision JCB rechargeable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together. -
Page 11: Component List
BASE PLATE LOCKING LEVER BATTERY PACK* - BASE PLATE PLEASE REFER TO TA- PENDULUM STROKE ADJUSTING BLE ON PAGE 12 FOR BATTERY INFORMATION BATTERY TEST BUTTON AND LEVER CHARGE INDICATOR* BLADE GUIDE ROLLER BATTERY RELEASE BUTTON *If applicable JCB-20JS Instruction & User Manual... -
Page 12: Tool Technical Data
AC 120 V, 60Hz, 200W 20.5V d.c. 2 x 3.5A NOISE INFORMATION A-Weighted Sound Pressure (LpA) 83 dB(A) A-Weighted Sound Power (LwA) 94 dB(A) KpA & KwA 5 dB(A) Wear ear protection when sound pressure is over 80 dB(A) JCB-20JS Instruction & User Manual... -
Page 13: Vibration Information
Plan your work schedule to spread any high vibration tool use across a number of days. THIS TOOL MAY CAUSE HAND-ARM VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. JCB-20JS Instruction & User Manual... -
Page 14: Operating Instructions
Make sure the power tool ON/OFF Trigger from the power point and remove the is not operated when inserting or removing battery from the charger. the battery. Use with JCB batteries only: Battery Charge Level JCB-20-15LI, JCB-20-20LI, JCB-20-30LI, JCB-20-40LI and JCB-20-50LI. -
Page 15: Inserting Saw Blade
(1). Gradually press the ON/OFF Trigger (2) to start the blade moving. To stop the jig saw, release the ON/OFF Trigger. Note: the TRIGGER SAFETY INTERLOCK button will also automatically return to the safety position JCB-20JS Instruction & User Manual... -
Page 16: Startup
Open the base plate locking lever (4). Tilt the base plate (5) to the required The pendulum stroke can be adjusted while position. the jig saw is running. Close the base plate locking lever to lock the base plate into position. JCB-20JS Instruction & User Manual... -
Page 17: Parallel Stop
Slide the dust nozzle (3) all the way into the risks damaging the surfaces of the power opening until the snap-in nose visibly and tool. audibly locks into place. Connect the dust nozzle with a vacuum cleaner or dust extractor. JCB-20JS Instruction & User Manual... -
Page 18: Transport And Storage
Ensure that the power tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the tool will be transported by car or other vehicle. JCB-20JS Instruction & User Manual... -
Page 19: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. - Page 20 JCB-20JS Instruction & User Manual...
-
Page 21: General Certificate Of Conformity
IEC 55014-2:2015 IEC 55014-1:2017 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &... - Page 22 JCB-20JS Instruction & User Manual...
Need help?
Do you have a question about the JCB-20JS and is the answer not in the manual?
Questions and answers