Using The "Further Programme Preset" Function - Sony GRAND WEGA KF-50SX200K Instruction Manual

Menu System

Using the "Further Programme Preset" function

With this feature you can:
a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped
picture).
b) Individually adjust the volume level of each channel.
c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
1
2
3
4
5
6
7
20
Menu System
Press the button on the remote control to display the menu
on the screen.
Push the joystick to select the
Set Up menu.
Push the joystick or to select Manual Set Up then push to
to enter.
Push the joystick or to select Further Programme Preset,
then push to to enter.
Push the joystick or to select the relevant programme number,
then push repeatedly to select:
a) ATT (RF attenuator)
b) VOL (Volume Offset)
c) AFT (Automatic Fine Tuning) or
d) DECODER
a) ATT
Push the joystick to select On, then press the
Repeat steps 5 and 6 a) to attenuate other channels.
b) VOL
Push the joystick or to adjust the volume level of the channel
over a range of -7 to +7, then press the
and 6b) to adjust the volume level of the other channels.
c) AFT
Push the joystick or to fine tune the channel frequency over
a range of -15 to +15, then press the
6c) if you wish to fine tune other channels.
d) DECODER
Push the joystick or to select AV1 (for a decoder connected
to the Scart :1/ 1) or AV3 (for a decoder connected to the
Scart :3/q 3 (SMARTLINK)), then press the
Repeat steps 5 and 6d) to select the AV1 or AV3 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:1/ 1 or :3/q 3 (SMARTLINK) on the back of the
set will appear on the selected programme number.
Press the button to exit and return to the normal TV screen.
The TV set is now ready for use.
symbol, then push to enter the
button.
button. Repeat steps 5
button. Repeat steps 5 and
button.
Picture Adjustment
Picture Mode Personal
Contrast
Brightness
Colour
Sharpness
Reset
AI
On
Noise Reduction
Off
Colour Tone Normal
Select: Enter Menu:
Set Up
Auto Tuning Start
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
Manual Set Up
Select: Start Auto Tuning
Set Up
Auto Tuning
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
Manual Set Up
Select: Enter:
Manual Set Up
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
- - - - - - -
Personal ID
Demo
Select: Enter:
Further Programme Preset
PROG ATT VOL AFT DECODER
1 Off 0 On Off
2 Off 0 On Off
3 Off 0 On Off
4
5
6
7
8
9
10
11
Select: Enter:
PROG ATT VOL AFT DECODER
1 Off
On
PROG ATT VOL AFT DECODER
1 On
- 5
PROG ATT VOL AFT DECODER
1 On -5
2
PROG ATT VOL AFT DECODER
1 On -5 2 Off
AV1
AV3