Setting Up Dolby Prologic; Using The Further Programme Preset Feature - Sony KV-28DS20U Service Manual

Additional TV Features
Setting Up Dolby Pro Logic
Before listening to Dolby Pro Logic encoded programmes, you can adapt the Dolby features to suit your own taste. Normally this
is only requires when you install the TV and the speakers, or when changing the speaker positions.
1. Press the MENU button on the remote control to display the
menu on the TV screen.
v
2. Press the button on the remote control to select the
symbol on the menu screen then press the
'PRESET' menu.
v
3. Press the button to select 'Dolby Pro Logic Setup' on the
b
menu screen then press the button to enter the 'DOLBY PRO
LOGIC SETUP' menu.
V v
4. Press the or buttons to select 'Mode', then press the
b
button to enter. Press the or
following modes then press the OK button to store the chosen
mode:
Dolby Pro Logic: all 5 speakers are activated
Dolby 3 stereo: surround speakers are not used
v
5. Press the button to select 'Centre Mode', then push the
b
button to enter. Press the or
following modes then press the OK button to store the chosen
mode:
Normal: all 5 speakers are activated
Wide: wider bandwidth for centre speaker
Phantom: centre speaker is not used
v
6. Press the button to select 'Test Tone' then push the
b B
to enter. Press the or buttons to select 'On', then press the
OK button.
The test tone will cycle through all the speakers.
v
7. Press the button to select the 'Left Speaker', then press the
b
button to confirm. The tone remains at the left speaker.
V v
8. Press the or buttons to alter the sound level, then press the
OK button.
9. Repeat steps 7 and 8 to select and adjust the 'Centre', 'Right',
and 'Surround' speakers, so that the sound output from all
speakers are balanced in relation to your sitting position.
10. Press the MENU button to remove the display from the TV
screen.
16
PICTURE CONTROL
Picture Mode Personal
. . . . . . . . .
PICTURE CONTROL
Contrast
Picture Mode
Reset Contrast
Reset
FormatFormat Wide FormatFormat
b
button to enter the
b
B
buttons to select one of the
b
B
buttons to select one of the
b
button
Additional TV Features

Using the further programme preset feature

With this feature you can a) manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset
the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a
connected VCR records the unscrambled signal.
1. Press the MENU button on the remote control to display
Personal . . . . . . . . .
the menu on the TV screen.
Wide
2. Press the
screen then press the
menu.
3. Press the
then press the
PROGRAMME PRESET' menu.
4. Press the
programme number then press the
to select a) AFT or b) DECODER. The selected item
changes colour.
Note: AFT will only be available on analoge channels.
5. a) AFT
Press the
frequency over a range of -15 to +15. Press the OK
button to confirm. Repeat steps 4 and 5a if you wish to
fine tune other channels.
b) DECODER
Press the
the programme position and press the OK button to
confirm. You can now attach a decoder to the AV1, AV2
or the AV3 socket on the back of the TV and the picture
from that decoder will appear on this programme
number. Repeat steps 4 and 5b to preset the AV output
for other programme positions.
6. Press the MENU button to remove the menu from the
TV screen.
PICTURE CONTROL
Picture Mode
Contrast
Reset
FormatFormat
v
button to select the symbol on the menu
b
button to enter the 'PRESET'
v FURTHER PROGRAMME PRESET
button to select 'Further Programme Preset'
b PROG AFT
button to enter the 'FURTHER 0 On
1 On
2 On
3
On
4
On
5 On
6 On
7 On
8 On
9
On
V v
or buttons to select the relevant
b
button repeatedly
FURTHER PROGRAMME PRESET
PROG AFT
0
V v
1
or buttons to fine tune the channel
2
3
4
5
6
7
8
9
V v
or buttons to select AV1, AV2 or AV3 for
Personal
. . . . . . . . .
PICTURE CONTROL
Picture Mode Personal . . . . . . . . .
Contrast
Reset
Wide FormatFormat Wide
DECODER
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
DECODER
On Off
On Off
On AV1
On Off
On AV2
On Off
10 Off
Off
On
On Off
On Off
19