Further Programme Preset menu
The 'Further Programme Preset' option in the 'Manual Set Up' menu allows you to obtain a better
picture if there is interference, set the volume level of an individual channel, fine tune the TV and
7
8
9
set up a channel for viewing signals from a Decoder.
0
With the 'Further Programme Preset' option highlighted, press b to enter the 'Further Programme
Preset' menu. Press v or V to highlight the channel number you require. Press b repeatedly to
select one of the following options:
(a) ATT (RF Attenuator). This allows you to improve the picture if there is interference from other
(b) VOL (Volume Level Offset). This allows you to set the volume level for an individual channel.
(c) AFT (Automatic Fine Tune). This allows you to fine tune a channel. Press v or V to select On.
(d) DECODER. This allows you to set a channel for viewing scrambled signals (e.g. from a pay
20 Advanced Operation
channels. Press v to select On. Press OK to store.
Press v or V to adjust the volume level over a range of -7 to +7. Press OK to store.
Alternatively, press v or V to manually adjust the tuning frequency over a range of -15 to +15.
Press OK to store.
TV decoder). Press v or V to select AV1 or AV3 depending on which socket is used to connect.
Press OK to store. The unscrambled signal now appears on the selected channel.