Quax COCOON 54F01-0100x Manual page 25

COCOON 54F01-0100x
Step 4.6 : Use the mounted bed,
the slatted frame 3, four eye pins D,
four nuts E and four bolts F
Push the eye pins (D) into the dril-
lings at the same height of the end
sides. Place the bottom (3) on the
eye pins of the sidess. Push the
nuts (E) through the eye pins and
the holes at the underside of the
botttom. Push the bolts (F) into the
holes at the top of the bottom and
tighten in the nuts.
Step 4.7 : Changing the bottom po-
sition
Loosen the bolts (F) and remove
the bottom. Move the eye pins (D)
to another position at the same
height and repeat step 4.6.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T T 0032 9 380 80 95 www.quax.eu - E E info@quax.eu
25