Preface - Flowserve IJ Installation Operation & Maintenance

Table of Contents

Advertisement

IJ PUMP OPERATION AND MAINTENANCE MANUAL

PREFACE

This Flowserve manual is a guide for the operation and maintenance of this pump. For the
convenience of experienced pump users, standard pump terminology is used in this manual.
This manual is for the journeyman millwright. Information on the use of tools, techniques, and
machining processes related to the trade are excluded.
This manual has two major parts. The front sections contain software prepared by Flowserve for the
pump. The Appendix contains software prepared by vendors for equipment, such as the driver,
coupling, and seals, which is included in the pump order. Components not purchased through
Flowserve will not be included in this manual. See TABLE OF CONTENTS for more details.
Part reference numbers included in parentheses match those called out in the ASSEMBLY drawing in
the back of this manual.
The terms inboard, drive, and coupling (nearest the coupling), and the terms outboard, non-drive, and
free (farthest from the coupling) define the two ends of the pump.
Special tightening is required for some bolting. Instructions are given in the OPERATING
SPECIFICATIONS section. Tightening procedures used in the millwright trade are adequate for most
bolting on the pump.
xi
BO2660-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IJ and is the answer not in the manual?

Table of Contents