Table of Contents
Advertisement
Note "Trip B" may be disabled (see "Activating Trip
B"). "Range" and "Instantaneous fuel consumption"
GETTING TO
parameters cannot be reset.
KNOW YOUR CAR
VALUES DISPLAYED
SAFETY
Outside temperature (for versions/markets, where
provided)
Indicates the temperature outside the passenger
STARTING AND
compartment.
DRIVING
Range
This indicates the approximate distance which can be
WARNING LIGHTS
travelled with the amount of fuel present in the
AND MESSAGES
tank. "- - - -" will appear on the display in the
following cases:
❒ range value lower than 50 km (or 30 mi)
IN AN EMERGENCY
❒ car parked with engine running for a long period.
IMPORTANT The range value variation can be
affected by several factors: driving style, type of route
SERVICING AND
(motorway, urban, mountain roads, etc.), conditions
MAINTENANCE
of use (load, tyre pressures, etc.). Trip planning
must therefore take the above into account.
TECHNICAL
SPECIFICATIONS
INDEX
20
Distance travelled
Shows the distance covered since the start of the
new journey.
Average consumption
Shows the approximate average fuel consumption
since the start of the new journey.
Instantaneous consumption
This value shows the fuel consumption. The value is
constantly updated. The display will show "- - - -"
if the car is parked with the engine running.
Average speed
This shows the car average speed as a function of the
overall time elapsed since the start of the new
mission.
Trip time
Shows the time elapsed since the start of a new
journey.
IMPORTANT If there is no information, the Trip
computer displays "- - - -" in place of the value.
When normal operating condition is restored,
calculation of different units will restart regularly. No
values displayed before the failure will be reset nor
will a new mission be started.
Advertisement
Table of Contents
