Table of Contents
Advertisement
❒ make sure that the compressor switch A fig. 154 is
in position 0 (off), start the engine, plug into the
GETTING TO KNOW
power socket in the central tunnel or the luggage
YOUR CAR
compartment fig. 155 and operate the compressor,
turning switch A to position I (on). Inflate the
tyre to the pressure specified in the "Inflation
SAFETY
pressure" paragraph in the "Technical
specifications" section. Check tyre pressure on
gauge B with compressor off to obtain a more
precise reading;
STARTING AND
❒ if after five minutes it is still impossible to reach at
DRIVING
least 1.8 bar, disengage the compressor from the
valve and power socket, then move the car
forwards by approx. ten metres in order
WARNING LIGHTS
to distribute the sealing fluid inside the tyre evenly,
AND MESSAGES
then repeat the inflation operation;
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 154
184
❒ if after this operation you still cannot reach at least
1.8 bar after 5 minutes from switching on the
compressor, do not resume driving but contact a
Fiat Dealership;
Apply the adhesive label where it can be
easily seen by the driver as a reminder
that the tyre has been treated with the tyre
quick repair kit. Drive carefully, particularly on
bends. Do not exceed 80 km/h. Do not
accelerate or brake suddenly.
fig. 155
F0Y0009
WARNING
F0Y0092
Advertisement
Table of Contents
