Table of Contents
Advertisement
Lifting the wiper blades
GETTING TO KNOW
If it is necessary to raise the blades from the
YOUR CAR
windscreen (e.g. in the event of snow or if the blades
need replacement) proceed as follows:
❒ turn ring nut A fig. 203 in position
SAFETY
wiper off);
❒ ignition key turned to the OFF position;
❒ after turning the ignition key to STOP, move for at
STARTING AND
least half a second the right lever in unstable
DRIVING
position within 2 minutes to activate the
windscreen wiper for a wiping section;
❒ the previous operation can be repeated for a
WARNING LIGHTS
maximum of 3 times in order to move the blades
AND MESSAGES
in the most convenient position for their possible
replacement;
❒ to lower the blades again turn the key to
MAR-ON.
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 203
234
IMPORTANT Place the blades back in contact with
the windscreen before activating the windscreen
wiper again and/or turning the ignition key to
MAR-ON.
(windscreen
Replacing the windscreen wiper blades
Proceed as follows:
❒ raise the wiper arm, press tab A fig. 204 of the
attachment spring and remove the blade from
the arm;
❒ fit the new blade, inserting the tab into the special
slot in the arm, making sure that it is locked.
❒ lower the windscreen wiper arm on the
windscreen.
Do not operate the windscreen wiper with
the blades lifted from the windscreen.
TRIP
RESET
fig. 204
F0Y0049
F0Y0114
Advertisement
Table of Contents
