Vl-350Czpvu-L Type, Vl-350Czpvu-R Type - Mitsubishi Electric Lossnay VL-250CZPVU-L-E Handbook

10-2 VL-350CZPVU-L type, VL-350CZPVU-R type

Note: The following procedure applies to the VL-350CZPVU-L type. For VL-350CZPVU-R type, the compo-
nents are placed in the right-left opposite positions.
(1) Turn off the power supply
[1] Stop the operation.
[2] Turn off the circuit breaker on the distribution board.
(2) Remove the heat exchanger
[1] Remove the filter cover (A) (1 pc.) and filter covers (B) (2 pcs.).
Note: For VL-350CZPVU-R, remove the filter covers (A) (2 pcs.) and filter cover (B) (1 pc.).
[2] Pull out the filter cases (OA), (RA), and (SA).
Filter case (OA)
Assembly precaution
When installing the filter cases, be sure to return the filter cases to the original positions.
(Check the position with the label attached to each filter case.)
Filter cover (A)
Filter cover (B)
Filter case (RA)
Filter case (SA)
─ 65 ─
Remove the filter covers from the bushes.
Filter case (OA)
Filter case (SA)
Filter case (RA)