Register A Handset; Restore Default Settings - Motorola E2 Manual

On the handset:
1. If the handset is not register to a base press
code (default = 0000) and press
2. If the handset is already register to a base press
SET and press
d
3. Scroll to REGISTER
4. The display will ask for the PIN to be entered. Enter the 4 digit PIN code
(default = 0000) and press
is successful. The handset is automatically assigned an available handset
number. Use this number when making internal calls.
Note
If registration is not successful the first time, please repeat the process again in
case the base registration period ran out of time. If the base is not found after a
few seconds, the handset returns to standby. Try registering again.
If there are already 4 handsets registered to the base, the registration will fail. You
must de-register another handset before you can register a new one.
9.8 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that
M
you are using.
1. Press , scroll
d
UNREGISTER
2. Scroll to
3. Enter the 4 digit PIN code (default = 0000) and press
M
u d
4. Scroll or
and press . You will hear a confirmation beep and the display will return
to the previous menu.
9.9

Restore default settings

You can restore your E2 to its default (original) settings.
All the handsets that are registered to the base will be retained.
Important
Resetting your phone to its default settings will delete all entries in the Calls and
Redial lists. Entries stored in the phonebook will be retained. Other handsets
M
registered to the base will only return to the default time.
1. Press , scroll
d
RESET
2. Scroll to
M
3. The display shows
4. Press to confirm or
automatically.
34
M
.
and press
M
. You will hear a beep if the registration
d
to ADVANCED SET
and press
to select the handset number that you want to de-register
d
M
to ADVANCED SET
and press
RESET ?.
B
to return to the previous menu. Your E2 will restart
M
M
and then enter the 4 digit PIN
M
.
M
.
M
M
and press
.
M
and press
.
d
ADVANCED
, scroll to
.
M
.
.
Base settings