Table of Contents
Advertisement
If you have purchased an additional handset separately,
you must register it to your SC200 base before it can
be used.
10.2.1 Register an additional handset
On the base:
1. Press and hold for 5 seconds until you hear a
continuous beep. The base will remain in registration
mode for 60 seconds.
On the handset:
1. Press
, the display shows PHONEBOOK.
2. Scroll
to ADVANCED SET
3. Scroll
to REGISTRATION and press
4. Enter the PIN code and press
5. The display shows WAITING, you will hear a beep if the
registration is successful. The handset is automatically
assigned an available handset number. Use this
number when making internal calls.
10.2.2 Register a different make of handset to your
SC200 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling
functions will work correctly between different makes / types
of handset and base. There is a possibility that certain
devices such as Caller ID will not work correctly.
Advanced settings
and press
.
.
.
On the base:
1. Press and hold for 5 seconds until you hear a
continuous beep. The base will remain in registration
mode for 60 seconds.
On the handset:
1. Follow the registration instructions given in your
handset's user guide.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 4 handsets registered to the base, the
registration will fail. You must de-register another handset
before you can register a new one.
10.2.3 De-register a handset
Use one handset to de-register another. You cannot de-
register the handset that you are using.
1. Press
, the display shows PHONEBOOK.
to ADVANCED SET
2. Scroll
3. Scroll
to UNREGISTER and press
4. Enter the 4 digit PIN code and press
5. Scroll
or
to the handset number that you want to
un-register and press
and press
.
.
.
.
31
Advertisement
Table of Contents
