Display The Version Number; Prompt Tone - aqprox! appLS06OMNI User Manual

The factory default parameters and functions can be found in the default settings table in the
appendix.
IV、 display the version number
After reading the "display version number" barcode, the version information of the device can be
output.
V、 prompt tone
After the reading engine successfully reads, it can output a PWM signal to drive the external buzzer
circuit to make a sound.The sound signal can be turned off or allowed to be output by setting, and the
type and volume of the sound can be modified by setting.The corresponding settings can be made with
the following setting codes.
1． Turn on/off the tone
Note: The bar code is silent when the sound is turned off, but there is an audible prompt when
reading the setup code.
reset
Display version number
5