aqprox! appLS06OMNI User Manual page 16

Reading interval 300ms
Custom reading interval (ms)
The reading interval can be set by the above setting code, or can be customized according to the actual
needs of the user. The setting range is 0~65535ms. After the upper limit is exceeded, the maximum value data
is saved.
For example: set the reading interval to 1S, the steps are as follows:
1、 Enter Settings - Read "Custom Reading Interval"
2、 Read the data code "1", "0", "0", "0" (see Appendix E "Data Code")
3、 Exit settings
8． Read code lock
Within the set length of time, after repeatedly reading the same bar code, it will enter the locked
state, and the second reading result will not be output.The bar code can no longer be read and output
until the bar code or device is removed and the set code lock time is exceeded.
Custom reading interval
14
Reading interval 500ms