1. Manuals
  2. Brands
  3. aqprox! Manuals
  4. Barcode Reader
  5. appLS06OMNI
  6. User manual

aqprox! appLS06OMNI User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the appLS06OMNI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for aqprox! appLS06OMNI

Summary of Contents for aqprox! appLS06OMNI

  • Page 2 One-dimensional scanning platform User manual...

  • Page 3: Table Of Contents

    Catalog Catalog ..........................1 System settings ........................4 I、 enter the settings ......................... 4 II、 exit settings ..........................4 III、 restore the factory settings ......................4 IV、 display the version number......................5 V、 prompt tone ..........................5 VI、 LED light tips ..........................7 VII、...
  • Page 4 I、 UPC-A ............................41 II、 UPC-E ............................44 III、 EAN-8 ............................48 IV、 EAN-13............................51 V、 ISBN ............................57 VI、 ISSN ............................60 VII、 Code 39 ........................... 63 VIII、 Code 93 ..........................66 IX、 Code 128........................... 67 X、 Code 11 ............................67 XI、...
  • Page 5 Appendix A: Default Settings Table: ....................90 Appendix B: Code_ID+AIM_ID List: ....................97 Appendix C: ASCII List: ........................100 Appendix D: Coded Identity Characters ..................102 Appendix E: Data Code ........................104 Appendix F: 0-127 ASCII Codes ......................105 Appendix G: Serial Port Command Function Implementation ............116 Appendix H: Command Settings Table ....................

  • Page 6: System Settings

    System settings I、 enter the settings Reading the "enter" barcode allows the reading engine to turn on the function of configuring the specific barcode (setting code function).After the function is turned on, the reading engine can be modified by reading one or more setting codes. Enter settings II、...

  • Page 7: Display The Version Number

    The factory default parameters and functions can be found in the default settings table in the appendix. reset IV、 display the version number After reading the "display version number" barcode, the version information of the device can be output. Display version number V、...
  • Page 8 **Open the sound Turn off the sound 2． Volume setting **Volume 1 (maximum) Volume 2 Volume 3...

  • Page 9: Led Light Tips

    3． Sound sequence **Transmission after first sound First transmission VI、 LED light tips **LED light on LED light off VII、 read settings 1． Automatic scan mode In the automatic scan mode, the reading engine performs continuous reading operations.
  • Page 10 **Automatic scanning 2． Button trigger scan mode In the button trigger scan mode, you need to press the button to control whether the reading engine starts working. Key trigger scan VIII、 Button reading time setting Key reading time: refers to the time that the reading engine will keep working during the process of pressing the button once the device enters the button to trigger the scanning mode.When the set time is exceeded, the reading engine will no longer work and you need to press the button again to wake it up.
  • Page 11 Key reading time 2S **Key reading time 3S IX、 Custom button reading time (S) The length of the key reading can be set by the above setting code, or can be customized according to the actual needs of the user. The setting range is 0~3000s. After the upper limit is exceeded, the maximum value data is saved.
  • Page 12 up the device is the farthest, and the most recent level is 10. Level 1 Level 2 Level 3 Level 4 ** level 5 level 6 Level 7 Level 8 Level 9 Level 10...
  • Page 13 4． Laser scanning mode The basic working principle of the laser scanner is: the scanner emits a beam of light through a laser diode, and reflects it on the surface of the bar code. After the light is reflected by the bar or the air, it returns to the reader and is converted into an electrical signal by the photoelectric converter.
  • Page 14 Recovery code recognition 6． Same barcode delay In order to avoid the same barcode being continuously read multiple times in a short time during the scanning process, the reading engine may be required to be within the set unit duration, and if the second reading is locked, until the target barcode is removed.
  • Page 15 Customize the same barcode delay (ms) The same barcode delay can be set by the above setting code, or can be customized according to the actual needs of the user. The setting range is 0~65535ms. After the upper limit is exceeded, the maximum value data is saved.
  • Page 16 Reading interval 300ms Reading interval 500ms Custom reading interval (ms) The reading interval can be set by the above setting code, or can be customized according to the actual needs of the user. The setting range is 0~65535ms. After the upper limit is exceeded, the maximum value data is saved.
  • Page 17 Reading code is not locked Reading code lock 200ms **Read code lock 300ms Reading code lock 500ms Custom code lock lock duration (ms) The reading time of the reading code can be set by the above setting code, or can be customized according to the actual needs of the user.

  • Page 18: System Sleep Settings

    Custom code lock lock duration 9． Inverted barcode reading settings The Normal video / Standard video bar code refers to a bar code with a light background and a dark foreground. Inverse video bar code, also known as inverse bar code, refers to a bar code with a dark background and a light color as the foreground.
  • Page 19 2. Set the sleep time 10 minutes of sleep 20 minutes of sleep 30 minutes of sleep Custom sleep time (minutes) In addition to using the above bar code to set the sleep time, the user can also customize the system sleep time according to their actual needs, the setting range is 0~1000 minutes, when set to 0, it will be saved in 1000 minutes.

  • Page 20: User Settings

    Custom sleep time 3. Laser motor sleep setting **Laser motor synchronous sleep Laser sleep only Motor only sleep user settings 1. Save as user settings Users can save their favorite settings as user settings, which will clear the previous user settings. Save as user settings...
  • Page 21 2. Restore user settings After restoring the factory settings, scan the “Restore User Settings” to restore the device to the saved user settings. Restore user settings 3. Clear user settings (equivalent to restoring factory settings) Clear user settings 4. Display user version Display user version 5.
  • Page 22 User version is set to V1.0.0 6. User version editing The user version can be edited by the user. When editing the user version, the character length is limited to 1~15. For example: Edit the user version to V1.0.1, the steps are as follows: 1、...

  • Page 23: Communication Settings

    Communication settings I、 Transmission mode setting There are four transmission modes of this device: keyboard (PS2) transmission, serial transmission, USB transmission, and virtual serial transmission. The keyboard (PS2) transmission mode needs to first pass the device through the scan setting code, set to the keyboard (PS2) transmission, and then power off, and the PC end is turned off and restarted before it can be used normally.

  • Page 24: Serial Port Parameter Setting

    Serial transmission **USB transfer Virtual serial port transmission II、 Serial port parameter setting During the serial port transmission process, you can send the setup code in the serial port assistant to set the device. For details, see Appendix F. 1． Baud rate The Baud Rate is in bits per second (bps: bits per second).
  • Page 25 2400 4800 **9600 14400 19200 38400...
  • Page 26 57600 115200 2． check There are 3 types of verification methods that can be selected, as shown in the following table.When the data bit is 7 bits, odd or even parity must be selected. If it is set to no parity, it will be regarded as even parity.
  • Page 27 3． Stop bit **Serial stop bit 1 Serial port stop bit 2 4． Data bit Serial data bit 7 **Serial data bit 8 5． Hardware flow control Open...

  • Page 28: Keyboard Port Function Setting

    **shut down III、 Keyboard port function setting 1． Keyboard layout The keyboard keys corresponding to different national languages are arranged, and the symbols are not the same.The reading engine can be virtualized into keyboard systems of different countries as needed. **US keyboard British keyboard Belgian keyboard...
  • Page 29 Czech-Y keyboard Czech-Z keyboard Danish keyboard Finnish keyboard French keyboard German keyboard Hungarian keyboard...
  • Page 30 Italian keyboard Norwegian keyboard Portuguese keyboard Slovenian keyboard Spanish keyboard Swedish keyboard...
  • Page 31 Swiss (French) keyboard Universal keyboard Turkey-Q keyboard Turkey-F keyboard Japanese keyboard 2． Keyboard input mode control CapsLock Key Function Control...
  • Page 32 ** CapsLock key does not affect data output CapsLock key affects data output Alt combination output ASCII characters under global keyboard layout In the global keyboard layout, in order to enable the reading engine to input any ASCII characters (hexadecimal values between 0x00 and 0xFF) in any language format, the virtual keyboard can be set to the Alt combination output ASCII character mode.When using this combination to output characters, the speed will be slower because more data is output.
  • Page 33 **Mode 2 Mode 3 Control character escape output Ctrl key combination ASCII control characters with hexadecimal values between 0x00 and 0x1F can be set to escape the output combination control keys for applications where a combination of control keys is required. Note: When the keyboard layout is set to be universal, setting this item is actually equivalent to changing the mode of the global keyboard.
  • Page 34 3． Inter-character delay When the virtual keyboard is continuously pressed, the key time delay of each character is output, and the delay time is the time from the completion of the previous character output to the output of the next character. **No delay between characters Delay between characters 5ms Delay between characters 10ms...
  • Page 35 saved after the upper limit is exceeded. For example: set the delay between reading custom characters to 1S, the steps are as follows: 1、 Go to Settings - Read "Delay between Custom Characters" 2、 Read the data code "1", "0", "0", "0" (see Appendix E "Data Code") 3、...
  • Page 36 Delay between strings is 200ms Custom inter-string delay (ms) The delay between the custom strings can be set by the above setting code, or can be customized according to the actual needs of the user. The setting range is 0~65535ms, and the maximum value data is saved after the upper limit is exceeded.
  • Page 37 Uppercase and lowercase All uppercase All lowercase...

  • Page 38: Data Format Setting

    Data format setting I、 AIM_ID **Close AIM_ID Open AIM_ID II、 Global identity character (Code_ID) **turn off global identity characters Turn on global identity characters...

  • Page 39: Data Inversion Setting

    Output order Prefix +Code_ID **Code_ID+ prefix III、 Data inversion setting Data inversion opens **Data inversion off IV、 Data multiple check...

  • Page 40: Data Terminator

    **Multiple calibration 1 time Multiple verification 2 times Multiple check three times V、 Data terminator The terminator is used to mark the end of a complete piece of data information and is used to indicate the complete end of a data output. Close data terminator **Open the carriage return terminator...
  • Page 41 Turn on the ESC terminator Turn on the STX terminator Open ETX terminator Open TAB terminator Open line break terminator Open carriage return + line feed end...
  • Page 42 Open space terminator...

  • Page 43: Code Setting

    Code setting I、 UPC-A Turn UPC-A on/off **Open shut down Check bit transmission **Open shut down...
  • Page 44 extensions **shut down Expanded to EAN-13 System character Cut off **Do not cut off...
  • Page 45 Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code Open 2 plus 5 digits additional code Whether there must be an additional code **no need...

  • Page 46: Upc-E

    must have Whether the additional code inserts a space **Do not insert insert II、 UPC-E Turn UPC-E on/off **Open...
  • Page 47 shut down Check bit transmission **Open shut down extensions **shut down Expanded to EAN-13 Expanded to UPC-A...
  • Page 48 System character Cut off **Do not cut off Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code...
  • Page 49 Open 2 plus 5 digits additional code Whether there must be an additional code must have **no need Whether the additional code inserts a space insert **Do not insert...

  • Page 50: Ean-8

    III、 EAN-8 Turn EAN-8 on/off **Open shut down Check bit transmission **Open shut down...
  • Page 51 extensions Turn on EAN-13 **Close to EAN-13 Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code...
  • Page 52 Open 2 plus 5 digits additional code Whether there must be an additional code must have **no need Whether the additional code inserts a space insert **Do not insert...

  • Page 53: Ean-13

    IV、 EAN-13 Turn EAN-13 on/off **Open shut down Check bit transmission **Open shut down...
  • Page 54 Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code Open 2 plus 5 digits additional code Whether there must be an additional code...
  • Page 55 must have **no need Whether the additional code inserts a space Insert **Do not insert Special prefix additional code Starting with 290 Must have an additional code...
  • Page 56 **Do not have to have additional code Starting at 378/379 Must have an additional code **Do not have to have additional code Beginning with 414/419 Must have an additional code...
  • Page 57 **Do not have to have additional code Beginning with 434/439 Must have an additional code **Do not have to have additional code Beginning with 977 Must have an additional code **Do not have to have additional code...
  • Page 58 Beginning of 978 Must have an additional code **Do not have to have additional code Beginning with 979 Must have an additional code **Do not have to have additional code...

  • Page 59: Isbn

    V、 ISBN Turn on/off ISBN Open **shut down Format selection **13-bit output 10-bit output...
  • Page 60 Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code Open 2 plus 5 digits additional code...
  • Page 61 Whether there must be an additional code must have **no need Whether the additional code inserts a space Insert **Do not insert...

  • Page 62: Issn

    VI、 ISSN Turn ISSN on/off Open ISSN **Close ISSN Format selection 8-bit output **13-bit output...
  • Page 63 Additional code **shut down Turn on 2-digit add-on code Turn on 5-digit add-on code Open 2 plus 5 digits additional code...
  • Page 64 Whether there must be an additional code must have **no need Whether the additional code inserts a space Insert **Do not insert...
  • Page 65 VII、 Code 39 Turn Code 39 on/off **Open shut down Checksum output check **Close check Turn on verification without transmission...
  • Page 66 Turn on verification and transfer Data transmission method **Standard data transmission Full ASCII transmission Whether to transmit start and stop characters transmission **Do not transmit...
  • Page 67 Turn on/off to Code 32 Open **shut down Code 32 prefix A **transmission Not transmitting Code 32 checksum...

  • Page 68: Code 39

    **transmission Not transmitting Code 32 start and stop characters Transmission **Do not transmit VIII、 Code 93 Turn Code 93 on/off **Open...

  • Page 69: Code 128

    shut down IX、 Code 128 Turn Code 128 on/off (AIM-128, GS1-128) **Open shut down X、 Code 11 Turn Code 11 on/off Open...
  • Page 70 **shut down Checksum output check Close check Turn on 1-bit verification and output ** Turn on 1-bit check and not output Turn on 2-bit verification and output...

  • Page 71: Codabar

    Turn on 2-bit check and not output XI、 Codabar Turn Codabar on/off **Open shut down Checksum output check **Close check...
  • Page 72 Turn on verification and output Turn on the check and not output Whether to transmit start and stop characters **Do not transmit transmission...

  • Page 73: Standard 2 Of 5

    XII、 Standard 2 of 5 Turn Standard 2 of 5 on/off Open **shut down Checksum output check **Close check Turn on verification (USS) and output...

  • Page 74: Interleaved 2 Of 5

    Open checksum (USS) does not output XIII、 Interleaved 2 of 5 Turn Interleaved 2 of 5 on/off **Open shut down Checksum output check **Close check Turn on verification (USS) and output...
  • Page 75 Open checksum (USS) does not output Turn on/off ITF-6 Open **shut down Does ITF-6 output check digits? Does not output check digits **Output check digit...

  • Page 76: Industrial 2 Of 5

    Turn ITF-14 on/off **Open shut down Does ITF-14 output verification? Does not output check digits **Output check digit XIV、 Industrial 2 of 5 Turn Industrial 2 of 5 on/off...
  • Page 77 Open **shut down Checksum output check **Close check Turn on verification (USS) and output Open checksum (USS) does not output...

  • Page 78: Matrix 2 Of 5

    XV、 Matrix 2 of 5 Turn Matrix 2 of 5 on/off Open **shut down Checksum output check **Close check Turn on verification (USS) and output...

  • Page 79: Gs1-Databar

    Open checksum (USS) does not output XVI、 GS1-Databar Turn GS1-Databar on/off Open **shut down Turn AI (01) transmission on/off **Enable AI (01) transmission Turn off AI (01) transmission...

  • Page 80: Msi-Plessey

    XVII、 MSI-Plessey Turn MSI-Plessey on/off Open **shut down Checksum output check **Close check Turn on Verify Mod10 and output Turn on verification Mod10 does not output...

  • Page 81: Plessey

    Turn on verification Mod10/10 and output Turn on verification Mod10/10 does not output Turn on verification Mod11/10 and output Turn on verification Mod11/10 does not output XVIII、 Plessey Turn Plessey on/off Open...
  • Page 82 **shut down Checksum output check Close check Turn on verification and output **Open verification does not output...

  • Page 83: Editing System

    Editing system I、 Code selection After selecting a code system, the related operations of all editing systems are only valid on the barcode of the code system. The default setting is all selection. Setting method: enter the setting - read "code system selection" - select the corresponding code system identity characters - exit the settings.

  • Page 84: Insert

    Suffix settings: Enter settings - read "set suffix" - read content (can be full ASCII, up to 10 digits) - exit settings Suffix canceled: Enter settings - read "set suffix" - exit settings Set suffix III、 insert Insert settings: Enter the settings - read "Insert Group 1 / Group 2 / Group 3 / Group 4" - read the 3-digit position code (format: 000-255) - read "insert content"...

  • Page 85: Delete

    Insert group 2 Insert group 3 Insert group 4 Insert content IV、 delete Delete settings: Enter the settings - read "Delete Group 1 / Group 2 / Group 3 / Group 4" - read the 3-digit position code (format: 000-255) - read "delete digits" - read 3 digits Bit number (format: 001-010, up to 10 digits) - exit setting.
  • Page 86 Delete Cancel: Go to Settings - Delete Group 1 / Group 2 / Group 3 / Group 4 - Exit Settings. Delete group 1 Delete group 3 Delete group 2 Delete group 4 Delete digits...

  • Page 87: Replace

    V、 replace Replace settings: Go to Settings - read "Replace Group 1 Original Content / Group 2 / Group 3 / Group 4 Original Content" - read the original content (can be full ASCII, up to 10 digits) - read new content (can For full ASCII code, up to 10 digits) - exit setting.

  • Page 88: Length Setting

    Replace target content VI、 Length setting The maximum length and the minimum length of the code system can be modified by setting a code corresponding to the length of each code system. The maximum length limit of any one-dimensional bar code shall not exceed 127; if the maximum length is less than the minimum length, only the bar codes of these two lengths are read;...
  • Page 89 Interleave 2 of 5 Maximum length Minimum length Industry 2 of 5 Maximum length Minimum length Matrix 2 of 5 Maximum length Minimum length CODABAR Maximum length Minimum length...
  • Page 90 CODE 128 Maximum length Minimum length CODE 93 Maximum length Minimum length CODE 11 Maximum length Minimum length Maximum length Minimum length...
  • Page 91 Plessey Maximum length Minimum length...

  • Page 92: Appendix

    Appendix Appendix A: Default Settings Table: default setting Remarks parameter name System settings switch Open volume Volume 1 (maximum) Beep First sound Sound sequence transmission LED light switch Open Reading mode Automatic scanning Key reading time Infrared sensing sensitivity Laser scanning mode Multi-line scanning Reading settings Same barcode delay...
  • Page 93 verification Serial port stop bit 1 person Serial data bit 8 digits Hardware flow control shut down CapsLock key lock shut down Alt combination output shut down ASCII characters Ctrl combination output control shut down Keyboard input mode character Keyboard layout American keyboard Inter-character delay Inter-string delay...
  • Page 94 Whether to cut off system characters Not cut off Additional code shut down Whether there must be an additional code no need Whether the additional code inserts a space Not inserted UPC-E Turn on/off reading Open Whether to output verification Output extensions shut down...
  • Page 95 No additional code Beginning with 414/419 required No additional code Beginning with 434/439 required No additional code Beginning with 977 required No additional code Beginning of 978 required No additional code Beginning with 979 required Additional code shut down Whether there must be an additional code no need Whether the additional code inserts a space Not inserted...
  • Page 96 Checksum output check Close check Data transmission format Standard transmission Start and terminator Not transmitting Whether to open shut down Code 32 prefix Pass A Transfer Code 32 Code 32 checksum transmission Code 32 Not transmitting start/terminator The maximum length Minimum length Code 93 Turn on/off reading...
  • Page 97 Checksum output check Close check Start and terminator Not transmitting The maximum length Minimum length Standard 2 of 5 Turn on/off reading shut down Checksum output check Close check The maximum length Minimum length Interleaved 2 of 5 Turn on/off reading Open Checksum output check Close check...
  • Page 98 The maximum length Minimum length MSI-Plessey Turn on/off reading shut down Checksum output check Close check The maximum length Minimum length GS1-Databar Turn on/off reading shut down AI (01) transmission Open Plessey Turn on/off reading shut down Checksum output check Verify not output The maximum length Minimum length...

  • Page 99: Appendix B: Code_Id+Aim_Id List

    Appendix B: Code_ID+AIM_ID List: Barcode type AIM ID Description Code id Common EAN-13 data EAN-13 EAN-13 data plus 2/5 digits additional code Normal EAN-8 data EAN-8 ]E4...]E1... EAN-8 data plus 2 digits additional code ]E4...]E2... EAN-8 data plus 5 digits additional code Normal UPC-E data UPC-E UPC-E data plus 2/5 digit additional code...
  • Page 100 No verification. MOD10 verifies but does not output check characters. Standard 2 of 5 MOD10 verifies and outputs the check character. No parity, no Full ASCII extension, as-is data output MOD43 checksum, and output check character MOD43 check, but does not output check characters Code 39 Full ASCII extension, no parity...
  • Page 101 Standard data packet GSI-databar（RSS） ISSN General data GS1-128（ FNC1 is at the 1st code word position. UCC/EAN-128） AIM-128 FNC1 is at the 2nd code word position. Plessey No special designation...

  • Page 102: Appendix C: Ascii List

    Appendix C: ASCII List: Hexad char Hexad Hexad char Hexa char Deci Deci chara Deci Decim ecima acte ecima ecima acte deci acte cter space " &...
  • Page 103 < >...

  • Page 104: Appendix D: Coded Identity Characters

    Appendix D: Coded Identity Characters...

  • Page 106: Appendix E: Data Code

    Appendix E: Data Code...

  • Page 107: Appendix F: 0-127 Ascii Codes

    Appendix F: 0-127 ASCII Codes...

  • Page 118: Appendix G: Serial Port Command Function Implementation

    Appendix G: Serial Port Command Function Implementation First, set (1) Fixed parameter settings Fixed parameters: code system, checksum, transmission format, etc., on/off, function item switch, various mode selection, interface parameters, etc. are all fixed options. //--------------------------------------------------------------------------------------------------------------------------- Format: Set code + ";" //--------------------------------------------------------------------------------------------------------------------------- For example: to open the tab terminator, enter: GED_T;...
  • Page 119 inputting 20 characters, and the current setting item accepts up to 16 bytes, then only the first 16 bytes are processed. (3) Multiple commands are sent simultaneously. Insert, delete, replace and other editing items, you need to set the editing position and edit the content.

  • Page 120: Appendix H: Command Settings Table

    Second, the limit of serial port command settings Allows the user to enter a 48-byte string on the serial port at a time, including setup codes and various editable strings.When the length of the command string is more than 48 bytes, the first 48 characters are intercepted for command processing.
  • Page 121 Turn on the sound GSD_O Turn off the sound GSD_F *Volume 1 (maximum) VLM_1 Tone Volume 2 VLM_2 setting Volume 3 VLM_3 *Transmission after first sound SND_F First transmission SND_S *LED light on LED_O light LED light off LED_F setting Readin Key trigger scan GLS_K...
  • Page 122 The same barcode delay is GSE_500 500ms Customize the same barcode Set the same barcode delay GSE=100; delay (ms) to 100ms *Read code is not locked GSL_0 Reading code lock 200ms GSL_200 Read Reading code lock 300ms GSL_300 code lock Reading code lock 500ms GSL_500 Set the reading lock to...
  • Page 123 *Laser motor synchronous Laser GSP_B sleep motor sleep Laser sleep GSP_L setting Motor sleep GSP_M Clear user settings USClr Save as user settings USSav user Restore user settings USRes setting User version is set to V1.0.0 UVSET_V1.0.0 Set the user version to User version editing UVSET UVSET=cnV1.0...
  • Page 124 calibration Serial odd parity CMC_O Serial port parity CMC_E *Serial stop bit 1 CMS_1 Serial port stop bit 2 CMS_2 *Serial data bit 8 CMB_8 Serial data bit 9 CMB_9 *CapsLock off CPL_F CapsLock open CPL_O *Off Alt combination output ALT_F Keyboa ASCII...
  • Page 125 Italy //IT PSX15 Norway ///NO PSX20 Portugal //PT PSX22 Slovenia PSX24 Spain //ES PSX25 Sweden // SE PSX26 Switzerland (France) PSX27 (Global) General // GL PSX31 Turkey-Q//TR-Q PSX32 Turkey-F//TR-F PSX33 Japan //JP& PSX36 *No delay between characters CCD_0 Delay between characters 5ms CCD_5 Inter-c Delay between characters...
  • Page 126 letter Uppercase and lowercase CT_IV case All uppercase CT_AU conver sion All lowercase CT_AL *Close AIM_ID AIM_F Open AIM_ID AIM_O Global identity character is on GID_O *Global identity characters are GID_F Order: prefix +CodeID ORD_L *Order: CodeID+ prefix ORD_R Data inversion opens INV_O *Data inversion is off INV_F...
  • Page 127 *Open UPC-A UA_ON Close UPC-A UA_FF **Output check UA_VT No output check UA_VN * Turn off extensions UA_E0 Expanded to EAN-13 UA_E2 Truncating system characters UA_E3 *Do not cut off system UA_E5 characters UPC-A *Close the additional code UA_A0 Turn on 2-digit add-on code UA_A2 Turn on 5-digit add-on code UA_A5...
  • Page 128 *Do not cut off system UE_E6 characters *Close the additional code UE_A0 Turn on 2-digit add-on code UE_A2 Turn on 5-digit add-on code UE_A5 Open 2 plus 5 digits additional UE_25 code Must have an additional code UEEXO *No additional code required UEEXF *Additional code without UESPF...
  • Page 129 Additional code inserts spaces 08SPO *Open EAN-13 13_ON Close EAN-13 13_FF **Output check 13_VT No output check 13_VN *Close the additional code 13_A0 Turn on 2-digit add-on code 13_A2 EAN-1 Turn on 5-digit add-on code 13_A5 Open 2 plus 5 digits additional 13_25 code Must have an additional code...
  • Page 130 414/419 must have an additional code at the 414EO beginning **434/439 does not have to have an additional code at the 434EF beginning 434/439 must have an additional code at the 434EO beginning **977 does not have to have an additional code at the 977EF beginning Must have an additional code...
  • Page 131 Open 2 plus 5 digits additional IS_25 code Must have an additional code ISEXO *No additional code required ISEXF *Additional code without BNSPF spaces Additional code inserts spaces BNSPO Open ISSN 13SNO *Close ISSN 13SNF 8-bit output ISSN SN_8 *13-bit output ISSN SN_13 *Close the additional code SN_A0...
  • Page 132 Standard data transmission 39_ST format Full ASCII data transmission 39_AS Transfer initiator and 39SEO terminator *Do not pass start and stop 39SEF characters Turn on CODE32 39Y32 * Turn off CODE32 39N32 *CODE32 pass prefix A 32_AT CODE32 does not pass the 32_AN prefix A CODE32 transmission start and...
  • Page 133 shut down 128FF CODE 128 maximum length 128MX 128MX=127; Default: 127 CODE 128 minimum length 128MN 128MN=1; Default: 1 Open 11_ON *shut down 11_FF *Close verification 11_VF Turn on 1-bit verification and 11_V1 output Turn on 1-bit check and not CODE 11_V2 output...
  • Page 134 CODEBAR minimum length CB_MN CB_MN=4; Default: 4 Open I25ON *shut down I25FF Open check code (USS) I25VU Open check code (OPCC) I25VP *Close verification I25VF Interle Turn on verification (USS) and ave 2 I25VU output of 5 Open checksum (USS) does I25VP not output Interleave 2 of 5 maximum...
  • Page 135 Open checksum (USS) does D25VP not output Open check code (USS) D25VU Open check code (OPCC) D25VP Close check code D25VF Industry2 of 5 maximum DN_MX DN_MX=127; Default: 127 length Industry2 of 5 minimum length DN_MN DN_MN=6; Default: 6 Open M25ON *shut down M25FF...
  • Page 136 Turn on MSI MSIPN *Close MSI MSIFF * Turn off MSI check MSIVF Enable MSI 1-bit check MSIV1 (Mod10) and output Enable MSI 1-bit check MSIV2 (Mod10) does not output Enable MSI 2-bit check MSIV3 (Mod10/10) and output Enable MSI 2-bit check MSIVT (Mod10/10) does not output Enable MSI 2-bit check...
  • Page 137 Setting PREFI PREFI=abc; Add prefix: abc Prefix setting cancel PREFI PREFI; Delete prefix Setting SUFFI SUFFI=abc; Add suffix: abc Suffix setting cancel SUFFI SUFFI; Remove suffix Insert the first group IPOS1 Insert the first set of data a IPOS1=001;ICO in the second bit of the data N1=a;...
  • Page 138 Cancel the second group of Undelete DPOS2 DPOS2; delete operations Delete the third group DPOS3 Delete 3 digits of data DPOS3=001;DC starting from the second ON1=3; Delete digits DCON1 digit of the data Cancel the deletion of the Undelete DPOS3 DPOS3;...
  • Page 139 selecti Cancel the selected code cancel CODCH CODCH; (defaul system t all)

  • Page 140: Appendix I: Control Character Escape Function Table

    Appendix I: Control Character Escape Function Table character Value No escaping Escaped combination (hexadecimal) corresponding control key NUL (Null char.) Null Ctrl+2 function key SOH (Start of Header) Keypad Enter Ctrl+A STX (Start of Text) Caps Lock Ctrl+B ETX (End of Text) Null Ctrl+C EOT (End of Transmission)
  • Page 141 Escape table for 0x1B~0x1F in different keyboard layouts: Character and escape corresponding combination control Keyboard layout keys United States Ctrl+[ Ctrl+\ Ctrl+] Ctrl+6 Ctrl+- Belgium Ctrl+[ Ctrl+< Ctrl+] Ctrl+6 Ctrl+- Scandinavia Ctrl+8 Ctrl+< Ctrl+9 Ctrl+6 Ctrl+- France Ctrl+^ Ctrl+8 Ctrl+$ Ctrl+6 Ctrl+= Germany...

  • Page 142: Appendix J: Test-Specific Bar Code

    Appendix J: Test-specific bar code Turn on continuous reading That is, the device enters the fast continuous reading state without any delay. Turn on continuous reading Turn on 3 seconds of sleep That is, the device automatically enters the sleep state after running for 3 seconds, and will be woken up again when the infrared sensor senses the motion of the object (this setting will not be saved after the power is turned off).

Table of Contents