aqprox! appLS06OMNI User Manual page 36

Custom inter-string delay (ms)
The delay between the custom strings can be set by the above setting code, or can be customized
according to the actual needs of the user. The setting range is 0~65535ms, and the maximum value data is
saved after the upper limit is exceeded.
For example: set the delay between reading custom strings to 1S, the steps are as follows:
1、 Enter Settings - Read "Custom Reading Interval"
2、 Read the data code "1", "0", "0", "0" (see Appendix E "Data Code")
3、 Exit settings
5． Force letter case conversion
This setting allows you to force the case of the read engine virtual keyboard letters to be locked.
** case does not convert
Custom inter-string delay
34
Delay between strings is 200ms