4. Fasten the belt grinder to the floor.
5. Roll the base under the front edge of the belt grinder.
6. Assemble the mounting arm (G) below the fork of the belt grind (K) with the
supplied screws. (See diagram 2.2)
Diagram 2.2: Assembly of curtains and curtain rods.
7. Lock the wheels under the base.
8. The magnetic cold water tap can be placed on the front of the belt grinder.
9. Pour 8-10 litres cold water in the cold water container located in the base.
10. Connect the motors to electricity.
The machine is now ready.
8