Assembly - Haussmann PT100708 Operator's Manual

Fig.1
Fig.1

ASSEMBLY

1) Installing the blade
WARNING
To prevent the risk of personal injury, always disconnect plug from the
power source before assembling parts, making adjustments, or changing
blades.
Blade
Guide roller
1. Only use saw blades that have a T-shank.
2. Turn the quick-action chuck (11) and keep it turned.
Fully insert the appropriate blade (13) into the quick-action chuck (11)
ensuring that it clicks into place.
3. The back edge of the saw blade (13) must be in the roller guide (8).
Let go of the quick-action chuck (11) so that it returns to its original position,
locking the saw blade (13) in place. (see fig.1)
WARNING
Before turning on the tool, ensure the plug is disconnected from the power
supply and that you have a thorough understanding of all the safety rules
that are covered in this manual.
Fig.2
2) Dust extraction
Your jigsaw is equipped with a dust port for dust and chip extraction.
To attach the dust port (4), insert it into the back of the tool using a push and
turn motion.
To remove the dust port (4) pull it out from the back of the tool using a turn and
pull motion.
20